Publikationen

Hill, O.; Ripken, T.; Lachmayer, R.; Wollweber, M. (2023): Simulating water as immersion medium for Scanning Laser Optical Tomography and correcting image artifacts due to refractive index mismatch,  European Conference on Biomedical Optics 2023, Munich Germany
ISBN: 9781510664692

Meyer, I.; Messmann, C. O.; Oel, M.; Ehlers, T.; Lachmayer, R. (2023): Multi-Material PBF-LB/M Process
DOI: https://doi.org/10.5446/62076

Wawer, M. L.; Lachmayer, R. (2023): Reifegradmodell für die Verwaltung des Datenzugriffs,  E-Science-Tage 2023: Empower Your Research – Preserve Your Data
DOI: https://doi.org/10.11588/heidok.00033142

Wawer, M. L.; Wurst, J.; Lachmayer, R. (2023): Quality assessment of research data management in research projects,  Vol. 1 (2023): 1st Conference on Research Data Infrastructure (CoRDI) - Connecting Communities
DOI: https://doi.org/10.5281/zenodo.8347690

Dai, Z.; Sundermeier, M.C.; Glück, T.; Hamlaoui, T.; Gooran Orimi, A.; Biermann, T.; Hanisch, L.; Feng, J.; Lachmayer, R. (2024): Investigation of angular resolution requirements for LiDAR systems,  SPIE OPTO, 2024, San Francisco, California, United States
DOI: 10.1117/12.3001526

Meyer zu Westerhausen, S.; Kyriazis, A.; Hühne, C.; Lachmayer, R. (2024): Design methodology for optimal sensor placement for cure monitoring and load detection of sensor-integrated, gentelligent composite parts,  International Conference on Engineering Design 2024
DOI: 10.1017/pds.2024.70

Raveendran, G.; Meyer zu Westerhausen, S.; Wurst, J.; Lachmayer, R. (2024): Automatic movement pattern analysis for data-driven system optimisation – an example for fattening livestock farming monitoring system,  International Conference on Engineering Design 2024
DOI: 10.1017/pds.2024.224

Sundermeier, M.C.; Dai, Z.; Glück, T.; Hamlaoui, T.; Biermann, T.; Gooran Orimi, A.; Lachmayer, R. (2024): Optical system for a laser-based near-infrared vehicle headlamp,  SPIE OPTO, 2024, San Francisco, California, United States
DOI: 10.1117/12.3001396

Altun, O.; Oladazimi, P.; Wawer, M.L.; Raumel, S.; Wurz, M.; Barienti, K.; Nürnberger, F.; Lachmayer, R.; Mozgova, I.; Koepler, O.; Auer, S. (2023): ENHANCED FINDABILITY AND REUSABILITY OF ENGINEERING DATA BY CONTEXTUAL METADATA,  Proceedings of the Design Society , Volume 3: ICED23 , July 2023 , pp. 1635 - 1644
DOI: 10.1017/pds.2023.164

Dai, Z.; Sundermeier, M. C.; Glück, T.; Findling, P.; Lachmayer, R. (2023): Increasing the detection range of non-scanning solid-state LiDAR systems using beam shaping,  Proceedings of Light-Emitting Devices, Materials, and Applications XXVII, 12411, SPIE OPTO, San Francisco, California, United States
DOI: https://doi.org/10.1117/12.2648721

Ehlers, T.; Meyer, I.; Oel, M.; Bode, B.; Gembarski, P. C.; Lachmayer, R. (2023): Effect-Engineering by Additive Manufacturing,  R. Lachmayer, B. Bode, & S. Kaierle (Eds.), Innovative Product Development by Additive Manufacturing 2021 (pp. 1–19). Springer International Publishing
DOI: https://doi.org/10.1007/978-3-031-05918-6_1

Glück, T.; Sundermeier, M. C.; Dai, Z.; Lachmayer, R. (2023): Physiologische Untersuchung von fahrzeugbasierten Fahrbahnprojektionen,  Licht2023, Salzburg, Österreich, 26.-29. März 2023, S.255-264
DOI: https://doi.org/10.15488/14730

Herrmann, K.; Pusch, F.; Plappert, S.; Bode, B.; Mozgova, I., Gembarski, P. C., Lachmayer, R. (2023): Prozesskettenorientierte Herstellbarkeitsanalyse von Produkten durch die Nutzung eines Constraint-Satisfaction-Problems,  Stuttgarter Symposium für Produktentwicklung SSP 2023
DOI: https://doi.org/10.15488/14221

Kahlfeld, R.; Meyer, I.; Kabelac, S.; Lachmayer, R. (2023): Design of a Thermo-Hydraulically Optimised Heat Exchanger for Production by Laser Powder Bed Fusion,  R. Lachmayer, B. Bode, & S. Kaierle (Eds.), Innovative Product Development by Additive Manufacturing 2021 (pp. 129–148). Springer International Publishing
DOI: https://doi.org/10.1007/978-3-031-05918-6_9

Meyer zu Westerhausen, S.; Schneider, J.; Lachmayer, R. (2023): Reliability Analysis for Sensor Networks and Their Data Acquisition: A Systematic Literature Review,  Proceedings of the International Conference on Engineering Design (ICED23), Bordeaux, France, 24-28 July 2023
DOI: https://doi.org/10.1017/pds.2023.307

Meyer zu Westerhausen, S.; Schneider, J.; Lachmayer, R. (2023): Automatic Reliability Assessment of Data Paths in Component-integrated Sensor Networks,  Proceedings of the 33rd European Safety and Reliability Conference (ESREL 2023), Southampton, United Kingdom, 03-08 September 2023
DOI: 10.3850/978-981-18-8071-1_P224-cd

Müller, L.; Wawer, M. L.; Heimes, N.; Uhe, J.; Koepler, O.; Auer, S.; Lachmayer, R.; Mozgova, I. (2023): Data quality assurance in the research process using the example of tensile tests,  DS 125: Proceedings of the 34th Symposium Design for X (DFX2023)
DOI: https://doi.org/10.35199/dfx2023.15

Plappert, S.; Ganter, N. V.; von Hören, T.; Gembarski, P. C.; Lachmayer, R. (2023): Decision-Support for Additive Repair Processes with a Multi-Agent System,  Applied Systemic Studies: Springer International Publishing
DOI: https://doi.org/10.1007/978-3-031-27470-1_1

Sundermeier, M. C.; Glück, T.; Dai, Z.; Hamlaoui, R; Lachmayer, R. (2023): Simulationsumgebung zur Ermittlung der lichttechnischen Einflüsse auf kamerabasierte Objekterkennung,  Licht2023, Salzburg, Österreich, 26.-29. März 2023, S.246-254
DOI: https://doi.org/10.15488/14731

Sundermeier, M.C.; Dai, Z.; Glück, T.; Findling, P.; Hanisch, L.; Lachmayer, R. (2023): Distorting optical system for automotive µLED-Array headlamps,  Proceedings of Light-Emitting Devices, Materials, and Applications XXVII, 12411, SPIE OPTO, San Francisco, California, United States
DOI: 10.1117/12.2666740

Wawer, M. L.; Herrmann, K.; Plappert, S.; Wurst, J.; Gembarski, P.; Lachmayer, R. (2023): Structuring and Provision of Manufacturing knowledge through the Manufacturing Resource Ontology,  DS 125: Proceedings of the 34th Symposium Design for X (DFX2023)
DOI: https://doi.org/10.35199/dfx2023.08

Wawer, M. L.; Wurst, J.; Lachmayer, R. (2023): Quality assessment of research data management in research projects,  Vol. 1 (2023): 1st Conference on Research Data Infrastructure (CoRDI) - Connecting Communities
DOI: https://doi.org/10.52825/cordi.v1i.420

Wurst, J.; Rosemann, D.; Mozgova, I.; Lachmayer, R. (2023): Concept and Implementation of a Student Design Project for the Development of Sustainable Products,  Kohl, H., Seliger, G., Dietrich, F. (eds) Manufacturing Driving Circular Economy. GCSM 2022. Lecture Notes in Mechanical Engineering. Springer, Cham
DOI: 10.1007/978-3-031-28839-5_88

Wurst, J.; Steinhoff, T.; Mozgova, I.; Hassel, T.; Lachmayer, R. (2023): Aspects of a Sustainability Focused Comparison of the Wire Arc Additive Manufacturing (WAAM) and the Laser Powder Bed Fusion (LPBF) Process,  Scholz, S.G., Howlett, R.J., Setchi, R. (eds) Sustainable Design and Manufacturing. SDM 2022. Smart Innovation, Systems and Technologies, vol 338. Springer, Singapore
DOI: 10.1007/978-981-19-9205-6_9

Altun, O.; Kutay, Y.; Mozgova, I.; Lachmayer, R. (2022): Procedure to Create an Automated Design Environment for Functional Assemblies,  International Conference on Engineering Design 2022
DOI: 10.1017/pds.2022.57

Dierend, H.; Altun, O.; Mozgova, I.; Lachmayer, R. (2022): Management of Research Field Data Within the Concept of Digital Twin,  Advances in System-Integrated Intelligence : Proceedings of the 6th International Conference on System-Integrated Intelligence (SysInt 2022), September 7-9, 2022, Genova, Italy, S. 205-214
DOI: 10.1007/978-3-031-16281-7_20

Ehlers, T.; Lachmayer, R. (2022): Design Rules for Laser Beam Melted Particle Dampers,  Proceedings of the Design Society, 2, S. 2443-2452
DOI: 10.1017/pds.2022.247

Ehlers, T.; Lachmayer, R.; Vajna, S.; Halle, T. (2022): Produzierbarkeit,  Vajna, S. (Hrsg.)(2022): Integrated Design Engineering, Springer Nature, Berlin, S. 327 - 365
DOI: 10.1007/978-3-662-60439-7_9

Ganter, N. V.; Ehlers, T.; Oel, M.; Behrens, B.-A.; Müller, P.; Hübner, S.; Althaus, P.; Bode, B.; Lachmayer, R. (2022): Do Additive Manufacturing Processes Enable More Sustainable Products? Circulation of Metallic Components Through Repair and Refurbishment by the Example of a Deep-Drawing Tool,  Innovative Product Development by Additive Manufacturing, 2022, Springer International Publishing
DOI: https://dx.doi.org/10.1007/978-3-031-27261-5_1

Grabe, T.; Röttger, J.; Rettschlag, K.; Lachmayer, R. (2022): Additive Manufacturing of Optics and Optomechatronics: Multiphysics Simulation Environments for Process, Materials and Design Analysis,  In: Lachmayer, R.; Kracht, D.; Wesling, V.; Ahlers, H. (Hrsg.): Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK); S. 51-76; Springer, Cham.
DOI: 10.1007/978-3-030-96501-3_3
ISBN: 978-3-030-96501-3_3

Herrmann, K.; Bode, B.; Wurst, J.; Gembarski, P. C.; Mozgova, I.; Lachmayer, R. (2022): Quantification of the material-related environmental impact of topology-optimized multi-material components,  DS 119: Proceedings of the 33rd Symposium Design for X (DFX2022): The Design Society
DOI: https://doi.org/10.35199/dfx2022.01

Hoppe, L. V.; Kuschmitz, S.; Gembarski, P. C.; Vietor, T.; Lachmayer, R. (2022): DIGITAL LEARNING ENVIRONMENTS TO SUPPORT DESIGN EDUCATION,  DS 117: Proceedings of the 24th International Conference on Engineering and Product Design Education (E&PDE 2022), London South Bank University in London, UK. 8th-9th September 2022
DOI: DOI: 10.35199/EPDE.2022.79

Kranert, F.; Budde, J.; Hinkelmann, M.; Lachmayer, R.; Neumann, J.; Kracht, D. (2022): Additively Manufactured Polymer Optomechanics and Their Application in Laser Systems,  In: Lachmayer, R.; Kracht, D.; Wesling, V.; Ahlers, H. (Hrsg.): Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK); S. 25-50; Springer, Cham.
DOI: 10.1007/978-3-030-96501-3_2
ISBN: 978-3-030-96501-3_2

Kuschmitz, S.; Hoppe, L. V.; Gembarski, P. C.; Lachmayer, R.; Vietor, T. (2022): DIGITAL KNOWLEDGE TRANSFER FOR ADDITIVE MANUFACTURING USING BLENDED LEARNING,  DS 117: Proceedings of the 24th International Conference on Engineering and Product Design Education (E&PDE 2022), London South Bank University in London, UK. 8th-9th September 2022
DOI: DOI: 10.35199/EPDE.2022.84

Lachmayer, R., Mozgova, I. (2022): Technical Inheritance as an Approach to Data-Driven Product Development,  in: Krause, D.; Heyden, E.; Eds. (Hrsg.): Design Methodology for Future Products; S. 47-64, Springer Nature Switzerland AG
DOI: 10.1007/978-3-030-78368-6_3
ISBN: 978-3-030-78367-9

Müller, P., Gembarski, P. C., & Lachmayer, R. (2022): Reasoning Mechanism for the Implementation of Computational Design Synthesis,  2022 IEEE 26th International Conference on Intelligent Engineering Systems (INES). IEEE.
DOI: https://doi.org/10.1109/ines56734.2022.9922623
ISSN: 1543-9259

Oel, M.; Gembarski, P. C.; Lachmayer, R. (2022): Using Axiomatic Design for the Development of Product Configuration Systems,  Proceedings of the 10th International Conference on Mass Customization and Personalization - Community of Europe. Novi Sad : University of Novi Sad - Faculty of Technical Sciences
DOI: https://doi.org/10.15488/12995

Plappert, S., Gembarski, P. C., Lachmayer, R. (2022): Knowledge-Based Design Evaluation of Rotational CAD-Models with a Multi-Agent System,  Advances in Systems Engineering: Springer
DOI: https://doi.org/10.1007/978-3-030-92604-5_5

Plappert, S.; Becker, C.; Gembarski, P. C.; Lachmayer, R. (2022): Application of Decentralized and Self-Regulating Knowledge Bases for Assembly Design Automation,  Proceedings of the 10th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2022), Novi Sad, Serbien
DOI: https://doi.org/10.15488/12909

Rettschlag, K.; Kranert, F.; Hinkelmann, M.; Jäschke, P.; Kaierle, S.; Lachmayer, R. (2022): Additive Manufacturing of Glass Materials for the Production of Optical, Thermal and Structural Components,  In: Lachmayer, R.; Kracht, D.; Wesling, V.; Ahlers, H. (Hrsg.): Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK); S. 1-23; Springer, Cham.
DOI: 10.1007/978-3-030-96501-3_1
ISBN: 978-3-030-96501-3_1

Röttger, J.; Grabe, T.; Sundermeier, M.C.; Kranert, F.; Heizmann, O.; Biermann, T.; Ziebehl, A.; Ley, P.-P.; Wolf, A.; Lachmayer, R. (2022): Additive Manufacturing of a Laser Heat Sink: Multiphysical Simulation for Thermal Material Requirement Derivation,  Innovative Product Development by Additive Manufacturing 2021, S. 183-198, Springer, Cham
DOI: 10.1007/978-3-031-05918-6_12
ISBN: 978-3-031-05917-9

Saralajew, S.; Marenzzi, R.; Wolf, A.; Ewecker, L.; Roos, S.; Lachmayer, R. (2022): Provident Vehicle Detection at Night: A subject study,  in: Proceedings of the 14th International Symposium on Automotive Lighting (ISAL), pp. 185-195
ISBN: 978-3-8316-4953-2

Steinnagel, C., Bastimar, C., Gembarski, P. C., Plappert, S., Müller, P., Lachmayer, R. (2022): Characterization of Additive Manufactured Structures for the Development of Foam-Replacement Cushions,  Innovative Product Development by Additive Manufacturing: Springer International Publishing
DOI: https://doi.org/10.1007/978-3-031-27261-5_6

Sundermeier, M. C.; Dierend, H.; Ley, P.-P.; Wolf, A.; Lachmayer, R. (2022): Active NIR illumination for improved camera view in automated driving application,  in: Proc. SPIE 12022, Light-Emitting Devices, Materials, and Applications XXVI, 120220A
DOI: 10.1117/12.2608162

Sundermeier, M.C.; Dierend, H.; Ley, P.-P.; Wolf, A.; Lachmayer, R. (2022): Active NIR illumination for improved camera view in automated driving application,  Proceedings of Light-Emitting Devices, Materials, and Applications XXVII, 120220A, SPIE OPTO, San Francisco, California, United States
DOI: 10.1117/12.2608162

Tatzko, S.; Ehlers, T.; Kleyman, G.; Lachmayer, R. (2022): Nonlinear granular damping of structures with cavities from additive manufacturing,  ENOC 2022 - Book of abstracts. Lyon : University of Lyon, S. 244-245
DOI: 10.15488/12805

Wawer, M.; Sheveleva T.; Koepler O.; Nürnberger F.; Mozgova I.; Lachmayer, R.; Auer, S. (2022): Parametrization of a Hybrid Component Production Process Chain Based on Semantically Annotated Data.,  Proceedings of the 10th International Conference on Mass Customization and Personalization- Community of Europe (MCP-CE 2022), Novi Sad : University of Novi Sad, 2022, S. 200-207.
DOI: 10.15488/13290

Wurst, J.; Mozgova, I.; Lachmayer, R. (2022): Normalization Matrix for Sustainability Assessments Considering the Laser Powder Bed Fusion Process,  Lachmayer, R., Bode, B., Kaierle, S. (eds) Innovative Product Development by Additive Manufacturing 2021. Springer, Cham
DOI: 10.1007/978-3-031-05918-6_14

Wurst, J.; Mozgova, I.; Lachmayer, R. (2022): Sustainability Assessment of Products manufactured by the Laser Powder Bed Fusion (LPBF) Process,  Procedia CIRP 105:243-248
DOI: 10.1016/j.procir.2022.02.040

Wurst, J.; Schneider, J. A.; Ehlers, T.; Mozgova, I.; Lachmayer, R. (2022): Corporate Strategy Based Quantitative Assessment of Sustainability Indicators at the Example of a Laser Powder Bed Fusion Process,  Scholz, S.G., Howlett, R.J., Setchi, R. (eds) Sustainable Design and Manufacturing. KES-SDM 2021. Smart Innovation, Systems and Technologies, vol 262. Springer, Singapore
DOI: 10.1007/978-981-16-6128-0_4

Bender, B.; Gericke, K.; Heusel, J.; Bronnhuber, T.; Helms, O.; Krzywinski, J.; Wölfel, C.; Klocke, F.; Dilger, K.; Müller, R.; Ehlers, T.; Lachmayer, R. (2021): Gestaltungsrichtlinien, In: Bender, B.; Gericke, K. (Hrsg.)(2021): Pahl/Beitz Konstruktionslehre, Springer Vieweg, Berlin Heidelberg, S. 567– 828
DOI: 10.1007/978-3-662-57303-7_16
ISBN: 978-3-662-57302-0

Biermann, T.; Ziebehl, A.; Grabe, T.; Röttger, J.; Ley, P.-P.; Wolf, A.; Lachmayer, R. (2021): Magnetically actuated solid body PDMS lens,  Proc. SPIE 11667
DOI: 10.1117/12.2578551

Brinker J.; Bertke A.; Ganter N.; Thomas O.; Lachmayer R. (2021): Können wir das nicht reparieren? – Entwicklung eines Klassifikationsrahmens für den Einsatz von Additive Repair im Maschinen- und Anlagenbau; In: Lachmayer R.; Rettschlag K.; Kaierle S. (eds) Konstruktion für die Additive Fertigung 2020; Springer Vieweg, Berlin, Heidelberg
DOI: 10.1007/978-3-662-63030-3_13

Dai, Z.; Li, Y.; Sundermeier, M.C.; Grabe, T.; Lachmayer, R. (2021): Lidars for vehicles: from the requirements to the technical evaluation,  in: 9th International Forum on Automotive Lighting (IFAL)
DOI: 10.15488/11352

Ehlers, T.; Lachmayer, R. (2021): Design of a Motorcycle Triple Clamp Optimised for Stiffness and Damping,  In: Pfingstl, S.; Horoschenkoff, A.; Höfer, P.; Zimmermann, M. (Hrsg.)(2021): Proceedings of the Munich Symposium on Lightweight Design 2020, Springer Vieweg Verlag, Berlin, Heidelberg, S. 1-17
DOI: 10.1007/978-3-662-63143-0_1
ISBN: 978-3-662-63142-3

Ganter N.; Gembarski P.C.; Lachmayer R. (2021): Einsatz additiver Fertigungsverfahren für die Bauteilreparatur: Ein literaturbasierter Überblick; In: Lachmayer R.; Rettschlag K.; Kaierle S. (eds) Konstruktion für die Additive Fertigung 2020; Springer Vieweg, Berlin, Heidelberg
DOI: 10.1007/978-3-662-63030-3_15

Ganter, N. V.; Plappert, S.; Gembarski, P. C.; Lachmayer, R. (2021): Assessment of Repairability and Process Chain Configuration for Additive Repair,  Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Springer
DOI: https://doi.org/10.1007/978-3-030-90700-6_29

Ganter, N.; Bode, B.; Gembarski, P.C.; Lachmayer, R. (2021): METHOD FOR UPGRADING A COMPONENT WITHIN REFURBISHMENT; Proceedings of the Design Society, 1, p. 2057-2066
DOI: 10.1017/pds.2021.467

Ganter, N.; Ehlers, T.; Gembarski, P.C.; Lachmayer, R. (2021): ADDITIVE REFURBISHMENT OF A VIBRATION-LOADED STRUCTURAL COMPONENT; Proceedings of the Design Society, 1, p. 345-354
DOI: 10.1017/pds.2021.35

Grabe, T.; Lammers, M.; Wang, S.; Wang, X.; Rettschlag, K.; Sleiman, K.; Barroi, A.; Biermann, T.; Ziebehl, A.; Röttger, J.; Ley, P.-P.; Wolf, A.; Jäschke, P.; Hermsdorf, J.; Kaierle, S.; Ahlers, H.; Lachmayer, R. (2021): Additive manufacturing of fused silica using coaxial laser glass deposition: experiment, simulation and discussion,  Proc. SPIE 11677
DOI: 10.1117/12.2577205

Grabe, T.; Rettschlag, K; Wang, X.; Wang, S.; Ziebehl, A.; Ley, P.; Lachmayer R. (2021): Additive Fertigung von Glas: Simulation und Messung von Temperaturen in der Prozesszone,  (Hrsg.): Tagungsband des 4. Symposiums Metalltechnik, S. 28-42, online verfügbar unter https://www.czm.tu-clausthal.de/fileadmin/SM_2021/Tagungsband_2021.pdf

Herrmann, K.; Altun, O.; Wolniak, P.; Mozgova, I.; Lachmayer, R. (2021): Methodischer Aufbau von Entwicklungsumgebungen nach dem Generative Parametric Design Approach,  DS 111: Proceedings of the 32nd Symposium Design for X (DFX2021): The Design Society
DOI: https://doi.org/10.35199/dfx2021.14

Herrmann, K.; Brockmöller, T.; Gembarski, P. C.; Mozgova, I.; Lachmayer, R. (2021): Fertigungsstufen-basiertes Gestaltungsmodell für mechanische Bauteile,  Proceedings of the of the Stuttgarter Symposium für Produktentwicklung SSP 2021, 20. May 2021, Stuttgart, Germany
DOI: https://doi.org/10.15488/14172

Hoppe, L. V.; Gembarski, P. C.; Lachmayer, R. (2021): Intelligent tutoring system as a tool of formative assessment in design education,  DS 110: Proceedings of the 23rd International Conference on Engineering and Product Design Education (E&PDE 2021), VIA Design, VIA University in Herning, Denmark. 9th-10th September 2021
DOI: DOI: 10.35199/EPDE.2021.40

Kranert, F.; Budde, J.; Hinkelmann, M.; Neumann, J.; Kracht, D.; Lachmayer, R. (2021): Thermische und strukturelle Analyse von Polymermaterialen in generativ gefertigten Optomechaniken für den Einsatz in der Laserentwicklung,  Clausthaler Zentrum für Materialtechnik (Hrsg.): Tagungsband des 4. Symposiums Metalltechnik, S. 44-54, online verfügbar unter https://www.czm.tu-clausthal.de/fileadmin/SM_2021/Tagungsband_2021.pdf

Kranert, F.; Budde, J.; Hinkelmann, M.; Wienke, A.; Neumann, J.; Kracht, D.; Lachmayer, R. (2021): Quasi-monolithic laser system based on 3D-printed optomechanics,  Proc. SPIE 11667
DOI: 10.1117/12.2577457

Leuteritz, G.; Held, M. P.; Lachmayer, R. (2021): Selective Laser Melting of Reflective Optics,  In: Heinrich, A. (Hrsg.): 3D Printing of Optical Components, Springer Series in Optical Sciences, S. 23-44
DOI: 10.1007/978-3-030-58960-8
ISBN: 978-3-030-58960-8

Müller, P.; Gembarski, P. C.; Lachmayer, R. (2021): Spezifikationen einer Entwicklungsumgebung zur Synthese einer patientenindividuellen Kurzschaftendoprothese der Hüfte,  Stuttgarter Symposium für Produktentwicklung SSP 2021, S. 151-162, Stuttgart
DOI: https://doi.org/10.15488/11541
ISSN: 2364-4885

Plappert, S.; Gembarski, P. C.; Lachmayer, R. (2021): Multi-Agent Systems in Mechanical Engineering: A Review,  Agents and Multi-Agent Systems: Technologies and Applications, Springer
DOI: https://doi.org/10.1007/978-981-16-2994-5_16

Plappert, S.; Wolniak, P.; Gembarski, P. C.; Lachmayer, R. (2021): Implicit and Explicit Modeling of Uncertainty in Early Design Stages of Product Design: A Comparative Study,  Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Springer
DOI: https://doi.org/10.1007/978-3-030-90700-6_74

Ziebehl, A.; Biermann, T.; Grabe, T.; Röttger, J.; Ley, P.-P.; Wolf, A.; Lachmayer, R. (2021): Potentials and Challenges in Additive Manufacturing of Nanoparticle-infused Silicone Optics,  DGaO-Proceedings 2021; https://www.dgao-proceedings.de/download/122/122_a11.pdf
DOI: 10.15488/11522

Ziebehl, A.; Biermann, T.; Grabe, T.; Röttger, J.; Ley, P.-P.; Wolf, A.; Lachmayer, R. (2021): Potentials and Challenges in Additive Manufacturing of Nanoparticle-infused Silicone Optics,  DGaO Proceedings 2021
DOI: https://doi.org/10.15488/11522

Altun, O.; Wolniak, P.; Mozgova, I.; Lachmayer, R. (2020): An analysis of scaling methods for structural components in the context of size effects and nonlinear phenomena,  Proceedings of the Design Society: DESIGN Conference, 1, S. 797-806
DOI: 10.1017/dsd.2020.320

Biermann, T.; Grabe, T.; Ley, P.-P.; Hüchting, J.; Lachmayer, R. (2020): Potentials and challenges of additive manufacturing using highly transparent silicone materials, DGaO 2020, ISSN: 1614-8436, https://www.dgao-proceedings.de/download/121/121_p23.pdf

Chatzizyrli, E.; Wienke, A.; Lachmayer, R.; Neumann, J.; Kracht, D. (2020): Opto-thermal simulation framework for the investigation of phosphor materials in laser-based lighting systems,  Proceedings of SPIE 11274
DOI: 10.1117/12.2546052

Chatzizyrli, E.; Wienke, A.; Neumann, J.; Lachmayer, R. (2020): Opto-Thermal Simulation of Laser-Excited Remote Phosphor Systems,  In: Lachmayer, R.; Roth, B.; Wolf, A. (Hrsg.): Spatially, Temporally and Spectrally Adapted Light for Applications, S. 9-11
ISBN: 978-3-95900-424-4

Ehlers, T.; Lachmayer, R. (2020): Einsatz additiv gefertigter Partikeldämpfer – eine Übersicht,  In: Lachmayer, R.; Rettschlag, K.; Kaierle, S. (Hrsg.)(2020): Konstruktion für die Additive Fertigung 2019, Springer Vieweg Verlag, Berlin Heidelberg, S. 123 – 142
DOI: 10.1007/978-3-662-61149-4_9
ISBN: 978-3-662-61148-7

Ehlers, T.; Lachmayer, R.; Vajna, S.; Halle, T. (2020): Producibility,  In: Vajna, S. (Hrsg.)(2020): Integrated Design Engineering, Springer Nature Switzerland AG 2020, Cham Switzerland, S. 287 - 323
DOI: 10.1007/978-3-030-19357-7_9
ISBN: 978-3-030-19356-0

Ehlers, T.; Wurst, J.; Lachmayer, R. (2020): Bewertung der ökologischen und ökonomischen Nachhaltigkeit in der Additiven Fertigung,  In: Lachmayer, R.; Rettschlag, K.; Kaierle, S. (Hrsg.)(2020): Konstruktion für die Additive Fertigung 2019, Springer Vieweg Verlag, Berlin Heidelberg, S. 177 – 199
DOI: 10.1007/978-3-662-61149-4_12
ISBN: 978-3-662-61148-7

Ganter, N.; Kloock-Schreiber, D.; Gembarski, P.C.; Lachmayer, R. (2020): Including Maintenance Services in the Solution Space - Considering Life Cycle Costs in Product Configuration,  Proceedings of the 22nd International Configuration Workshop (CWS 2020), 10.-11.09.2020, Vicenza, Italy

Grabe, T.; Biermann, T.; Bayerl, M.; Wolf, A.; Lachmayer, R. (2020): Quantitative analysis of additively manufactured transparent polymer optics, DGaO 2020, ISSN: 1614-8436, https://www.dgao-proceedings.de/download/121/121_b22.pdf

Grabe, T.; Budde, J.; Kranert, F.; Wienke, A.; Neumann, J.; Kracht, D.; Lachmayer; R. (2020): Kühlkörper-Designansatz für einen in AlSi10Mg eingebetteten YAG-Laserkristall,  In: Lachmayer, R.; Rettschlag, K.; Kaierle, S. (Hrsg.): Konstruktion für die Additive Fertigung 2019, S. 1-10
DOI: 10.1007/978-3-662-61149-4_11
ISBN: 978-3-662-61148-7

Grabe, T.; Li, Y.; Krauss, H.; Wolf, A.; Wu, J.; Yao, C.; Wang, Q.; Lachmayer, R.; Ren, W. (2020): Freeform optics design for Raman Spectroscopy ,  Proceedings of SPIE 11287
DOI: 10.1117/12.2544708

Held, M. P.; Wolf, A.; Lachmayer, R. (2020): High-Resolution LED Vehicle Headlights,  In: Lachmayer, R.; Roth, B.; Wolf, A. (Hrsg.): Spatially, Temporally and Spectrally Adapted Light for Applications, S. 18-20
ISBN: 978-3-95900-424-4

Hoppe, L.; Gembarski, P. C.; Plappert, S.; Lachmayer, R. (2020): Anwendung wissensbasierter Konstruktionssysteme zur Lösungsbewertung von CAD-Konstruktionen,  18. Gemeinsames Kolloquium Konstruktionstechnik 2020: Nachhaltige Produktentwicklung: KT 2020, S 199-208, Universität Duisburg-Essen
DOI: 10.17185/duepublico/73094
ISBN: 978-3-940402-43-1

Hoppe, L.; Plappert, S.; Gembarski, P.C.; Lachmayer, R. (2020): Development of an Intelligent Tutoring System for Design Education ,  Proceedings of the 22nd International Conference on Engineering and Product Design Education, Herning, Denmark
DOI: 10.35199/EPDE.2020.46

Kloock-Schreiber, D.; Brockmöller, T.; Schneider, J.; Gembarski, P.C.; Mozgova, I.; Lachmayer, R. (2020): TRIZ-Reverse for PSS Potential Determination,  Proceedings of the 9th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2020), 23.-25.09.2020, Novi Sad, Serbia

Kloock-Schreiber, D.; Siqueira, R.; Gembarski, P.C.; Lachmayer, R. (2020): Discrete-Event Simulation for Specification Design of Products in Product-Service Systems,  Proceedings of the Design Society: DESIGN Conference
DOI: 10.1017/dsd.2020.295

Kranert, F.; Budde, J.; Need, P.; Bernhard, R.; Lammers, M.; Rettschlag, K.; Grabe, T.; Wienke, A.; Neumann, J.; Wiche, H.; Wesling, V.; Ahlers, H.; Lachmayer, R.; Kracht, D. (2020): 3D-printed, low-cost, lightweight optomechanics for a compact, low-power solid state amplifier system,  Proceedings of SPIE 11261
DOI: 10.1117/12.2544268

Kranert, F.; Rettschlag, K.; Wienke, A.; Hohnholz, A.; Neumann, J.; Jäschke, P.; Kracht, D.; Lachmayer, R. (2020): Generation of functional curved waveguides by CO2-laser based deposition of coreless fused silica fibers,  Proceedings of SPIE 11349
DOI: 10.1117/12.2554516

Lachmayer, R.; Bode, B.; Grabe, T.; Rettschlag, K. (2020): Integration spezifischer Effekte in Strukturbauteilen mittels additiver Fertigungsverfahren,  In: Lachmayer, R.; Rettschlag, K.; Kaierle, S. (Hrsg.): Konstruktion für die Additive Fertigung 2019, S. 159-175
DOI: 10.1007/978-3-662-61149-4_1
ISBN: 978-3-662-61148-7

Lachmayer, R.; Held, M. P.; Roth, B.; Wolf, A. (2020): Tailored Light,  In: Lachmayer, R.; Roth, B.; Wolf, A. (Hrsg.): Spatially, Temporally and Spectrally Adapted Light for Applications, S. 7-8
ISBN: 978-3-95900-424-4

Leuteritz, G.; Schudak, S.; Rohling, M.; Lachmayer, R. (2020): Formschlüssige multimaterielle Additive Fertigung zur Realisierung funktionsintegrierter Hybrid-Bauteile,  In Lachmayer, R.; Lippert, R. B.; Kaierle, S. (Hrsg.): Konstruktion für die Additive Fertigung 2018, S. 299-317
DOI: 10.1007/978-3-662-59058-4
ISBN: 978-3-662-59058-4

Leuteritz, G.; Wolf, A.; Lachmayer, R. (2020): Additive Manufacturing of Reflectors for Miniaturized Optical Systems,  In: Lachmayer, R.; Roth, B.; Wolf, A. (Hrsg.): Spatially, Temporally and Spectrally Adapted Light for Applications, S. 30-32
ISBN: 978-3-95900-424-4

Ley, P.-P., August, J., & Lachmayer, R. (2020): Design Tool to Develop Highly Efficient Optomechatronic Systems,  Proceedings of the Design Society: DESIGN Conference, 1, S. 305-314
DOI: 10.1017/dsd.2020.270

Ley, P.-P.; Lachmayer, R. (2020): Hybrid Ray Tracing,  DGaO Proceedings 2020, ISSN: 1614-8436, https://www.dgao-proceedings.de/download/121/121_b28.pdf
DOI: 10.15488/9927

Li, H.; Brockmöller, T.; Gembarski, P.C.; Lachmayer, R. (2020): An Investigation of Generative Parametric Design Approach for Robust Solution Development,  Proceedings of the Design Society: DESIGN Conference
DOI: 10.1017/dsd.2020.273

Li, Y., Wolf, A.; Lachmayer, R. (2020): Laser LCoS High-Resolution Headlamp,  In: Lachmayer, R.; Roth, B.; Wolf, A. (Hrsg.): Spatially, Temporally and Spectrally Adapted Light for Applications, S. 33-35
ISBN: 978-3-95900-424-4

Li, Y.; Knöchelmann, M.; Lachmayer, R. (2020): An innovative concept for the next-generation,  The 8th International Forum on Automotive Lighting (IFAL), Shanghai
DOI: /10.15488/9877

Müller, P.; Gembarski, P. C.; Lachmayer, R. (2020): Detektion von Konstruktionsfehlern durch eine automatisierte Objekterkennung mittels Deep Learning,  18. Gemeinsames Kolloquium Konstruktionstechnik 2020: Nachhaltige Produktentwicklung: KT 2020., S 101-112, Universität Duisburg-Essen
DOI: https://doi.org/10.15488/11539
ISBN: 978-3-940402-43-1

Plappert, S.; Gembarski, P. C.; Lachmayer, R. (2020): The Use of Knowledge-Based Engineering Systems and Artificial Intelligence in Product Development: A Snapshot,  Information Systems Architecture and Technology: Proceedings of 40th Anniversary International Conference on Information Systems Architecture and Technology – ISAT 2019
DOI: 10.1007/978-3-030-30604-5_6

Plappert, S.; Gembarski, P.C.; Lachmayer, R. (2020): Product Configuration with Bayesian Network,  Proceedings of the 9th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2020), 23.-25.09.2020, Novi Sad, Serbia

Plappert, S.; Gembarski, P.C.; Lachmayer, R. (2020): Decision-Making with Probabilistic Reasoning in Engineering Design,  Foundations of Intelligent Systems. ISMIS 2020. Lecture Notes in Computer Science, vol. 12117, Publisher: Springer, Cham
DOI: DOI: 10.1007/978-3-030-59491-6_6

Plappert, S.; Hoppe, L.; Gembarski, P.C.; Lachmayer, R. (2020): Application of Knowledge-Based Engineering for Teaching Design Knowledge to Design Students,  Proceedings of the Design Society: DESIGN Conference
DOI: 10.1017/dsd.2020.300

Rettschlag, K.; Wolf, A.; Lachmayer, R. (2020): Materialcharakterisierung transparenter Kunststoffe für die Additive Fertigung,  In: Lachmayer, R.; Lippert, R. B.; Kaierle, S. (Hrsg.): Konstruktion für die Additive Fertigung 2018, Springer Verlag, S. 193-207
DOI: 10.1007/978-3-662-59058-4
ISBN: 978-3-662-59058-4

Rettschlag, K; Hohnholz, A.; Jäschke, P.; Kracht, D.; Kaierle, S.; Lachmayer, R. (2020): Laser glass deposition of spheres for printing micro lenses,  Proc. CIRP 94, S. 276-280
DOI: 10.1016/j.procir.2020.09.052

Schneider, J.; Gatzen, M.; Lachmayer, R. (2020): The importance of considering fleet size in the lifecycle cost analysis of product service systems,  Proceedings of the Design Society: Design Conference, 1, S. 1365 – 1374
DOI: 10.1017/dsd.2020.284

Schneider, J.; Mozgova, I.; Lachmayer, R. (2020): Product-service systems as an economical solution to improve the sustainability of products,  Proceedings of the 9th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2020)

Weigt, B.; Homeyer, K.; Lachmayer, R. (2020): Bestimmung der Halbleiterparameter einer kommerziellen LED während der Alterung durch Kapazitätsmessung,  DGaO Proceedings 2020, ISSN 1614-8436, https://www.dgao-proceedings.de/download/121/121_p2.pdf

Wolniak, P.; Kloock-Schreiber, D.; Sauthoff, B.; Lachmayer, R. (2020): Integrating Architectural Design Changes In Computer-aided Design Optimization,  9th International Conference on Mass-Customization and Personalization – Community of Europe (MCP-CE 2020)

Wolniak, P.; Sauthoff, B.; Kloock-Schreiber, D.; Lachmayer, R. (2020): Automated Product Functionality and Design Optimization Instancing a Product-Service System,  Proceedings of the Design Society: DESIGN Conference, pp. 1405–1414
DOI: 10.1017/dsd.2020.323

Chatzizyrli, E.; Wienke, A.; Lachmayer, R.; Neumann, J.; Kracht, D. (2019): Structured Auxiliary Mesh (SAM) algorithm for opto-thermal simulation of laser-based lighting systems,  Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference, OSA Technical Digest (Optical Society of America, 2019), paper ej_p_11.

Ehlers, T.; Lippert, R. B.; Lachmayer, R. (2019): Bewertung von Strukturbauteilen aus gradierten Materialien für Selektives Laserstrahlschmelzen,  In: Lachmayer, R.; Lippert, R. B.; Kaierle, S. (Hrsg.)(2019): Konstruktion für die Additive Fertigung 2018, Springer Vieweg Verlag, Berlin Heidelberg, S. 109 – 127
DOI: 10.1007/978-3-662-59058-4_7
ISBN: 978-3-662-59057-7

Held, M. P.; Kloppenburg, G.; Lachmayer, R. (2019): Micro pixel LEDs: design challenge and implementation for high-resolution headlamps,  Proceedings of SPIE 10940
DOI: 10.1117/12.2509336

Khan, M. S.; Rahlves, M.; Lachmayer, R.; Roth, B. (2019): Low cost fabrication of polymer based optical devices,  DGaO-Proceedings 2019, ISSN 1646-8436, online verfügbar unter https://www.dgao-proceedings.de/download/120/120_a34.pdf

Kloock-Schreiber, D.; Domarkas, L.; Gembarski, P.C.; Lachmayer, R. (2019): Enrichment of Geometric CAD Models for Service Configuration,  Proceedings of the 21st International Configuration Workshop (CWS 2019), Hamburg, September 19 - 20, 2019

Knöchelmann, M.; Ley, P.-P.; Kloppenburg, G.; Mozgova, I.; Lachmayer, R. (2019): Methodische Entwicklung eines opto-mechatronischen Systems am Beispiel eines hochadaptiven Fahrzeugscheinwerfers,  Tagungsband der VDI Fachtagung Mechatronik 2019. Paderborn: Universität Padeborn
DOI: 10.15488/4683

Leuteritz, G.; Lachmayer, R. (2019): Concepts for integrating laser polishing into an additive manufacturing system,  Proceedings of SPIE 10909
DOI: 10.1117/12.2509447

Ley, P.-P.; Knöchelmann, M.; Kloppenburg, G.; Lachmayer, R. (2019): Development Methodology for Optomechatronic Systems Using the Example of a High-Resolution Projection Module,  Proceedings of the Design Society: International Conference on Engineering Design, Vol. 1, Iss. 1, pp. 2547-2556
DOI: 10.1017/dsi.2019.261

Ley, P.-P.; Lachmayer, R. (2019): Imaging and non-imaging illumination of DLP for high resolution headlamps,  Proceedings of SPIE 10932
DOI: 10.1117/12.2507436

Li, Y.; Grabe. T.; Lachmayer, R. (2019): Investigation on RGB Laser LCoS High-resolution Headlamps,  DGaO-Proceedings 2019, ISSN 1646-8436, online verfügbar unter https://www.dgao-proceedings.de/download/120/120_b7.pdf
DOI: 10.15488/5484

Li, Y.; Knöchelmann, M.; Lachmayer, R. (2019): Concepts of inhomogeneous illumination of area-based light modulators for high-resolution headlamps,  Proceedings of SPIE 10932
DOI: 10.1117/12.2508620

Li, Y.; Knöchelmann, M.; Lachmayer, R. (2019): High-resolution headlamps: Innovative functionalities and the potential of using laser diodes as light sources,  7th International Forum on Automotive Lighting (IFAL), Shanghai
DOI: 10.15488/5333

Rettschlag, K.; Leuteritz, G.; Lachmayer, R. (2019): Comparison of laser polishing effects for different materials,  DGaO-Proceedings 2019, ISSN 1646-8436, online verfügbar unter https://www.dgao-proceedings.de/download/120/120_p38.pdf

Roth, J., Thamm, M., Held, M., Lachmayer, R. (2019): Micro-Pixel-LED-Headlights,  Proceedings of the 13th International Symposium on Automotive Lighting (ISAL), pp. 259-268
ISBN: 978-3-8316-4818-4

Schneider, J.; Mozgova, I.; Lachmayer, R. (2019): An Approach for Choosing the Cost Effective Design for a Product-Service System While Maintaining its Desired Reliability,  Proceedings of the Design Society: International Conference on Engineering Design, Vol. 1, pp. 3041 - 3050
DOI: 10.1017/dsi.2019.311

Siqueira, R.; Lachmayer, R. (2019): A Manufacture constrained design methodology application for a Tailored Forming Hybrid Component,  In: Dröder K., Vietor T. (Hrsg.) Technologies for economical and functional lightweight design. Zukunftstechnologien für den multifunktionalen Leichtbau. Springer Vieweg, Berlin, Heidelberg, S. 133-143
DOI: 10.1007/978-3-662-58206-0_13

Wolniak, P.; Sauthoff, B.; Lachmayer, R.; Mozgova, I. (2019): Scaling of Technical Systems Using an Object-Based Modelling Approach,  Proceedings of the Design Society: International Conference on Engineering Design, Vol. 1, pp. 1603–1612
DOI: 10.1017/dsi.2019.166

Chatzizyrli, E.; Tinne, N.; Lachmayer, R.; Neumann, J.; Kracht, D. (2018): Opto-thermal simulation model for optimizing laser-excited remote phosphor systems,  Proceedings of SPIE 10693
DOI: 10.1117/12.2312644

Chatzizyrli, E.; Tinne, N.; Lachmayer, R.; Neumann, J.; Kracht, D. (2018): Multiphysics simulation strategy for the optimization of laser-excited remote phosphor systems,  DGaO Proceedings 2018, ISSN: 1614-8436, https://www.dgao-proceedings.de/download/119/119_p50.pdf

Ehlers, T.; Lippert, R. B. Lachmayer, R. (2018): An Approach to Design Functionally Graded Materials using Additive Manufacturing,  Symposium Lightweight Design in Product Development, S. 57 - 60

Gembarski, P. C.; Lachmayer, R. (2018): The Parameter Space Matrix as Planning Tool for Geometry-based Solution Spaces,  Proceedings of the 8th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2018), Novi Sad, Serbien, 19.09.-21.09.2018

Gembarski, P. C.; Lachmayer, R. (2018): Complexity Management of Solution Spaces in Mass Customization,  Proceedings of the 8th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2018), Novi Sad, Serbien, 19.09.-21.09.2018

Gembarski, P. C.; Lachmayer, R. (2018): The Hanover Knowledge-Based-Design-Lab: A Project-Oriented Capstone Course in Engineering Design,  Proceedings of the 20th International Conference on Engineering and Product Design Education (E&PDE2018), London, UK, 06.09.-07.09.2018

Gembarski, P. C.; Schreiber, D.; Schoormann, T.; Knackstedt, R.; Lachmayer, R. (2018): “Are we talking about the same thing?” Analyzing Effects of Mass Customization and Product-Service Systems on Sustainability,  Proceedings of the 8th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2018), Novi Sad, Serbien, 19.09.-21.09.2018

Held, M. P.; Ley, P.-P.; Lachmayer, R. (2018): Calculation comparison of an additive and subtractive light modulator for high-resolution pixellight headlamps,  Proceedings of SPIE 10554
DOI: 10.1117/12.2290238

Held, M. P.; Ley, P.-P.; Wolf, A.; Lachmayer, R. (2018): Anforderungen an die Ausleuchtung von Lichtmodulatoren,  DGaO Proceedings 2018, ISSN: 1614-8436, https://www.dgao-proceedings.de/download/119/119_p46.pdf
DOI: 10.15488/4084

Ilango, S.; Knöchelmann, M.; Kahrs, L. A.; Wolf, A.; Ortmaier, T.; Lachmayer, R. (2018): User evaluation study on illumination requirements to design an augmented reality projector for open liver surgery,  Proceedings of SPIE 10693
DOI: 10.1117/12.2309667

Khan, M. S.; Rahlves, M.; Roth, B.; Lachmayer. R. (2018): Laser based projection system for traffic collision prevention,  DGaO Proceedings 2018, ISSN 1614-8436, https://www.dgao-proceedings.de/download/119/119_p48.pdf

Knöchelmann, M.; Kloppenburg, G.; Lachmayer, R. (2018): Headlamp Innovations: Optical concepts for fully adaptive light distributions,  Proceedings of SPIE 10546
DOI: 10.1117/12.2290013

Knöchelmann, M.; Wolf, A.; Kloppenburg, G.; Lachmayer, R. (2018): Aktiver Scheinwerfer mit DMD-Technologie zur Erzeugung vollständiger Lichtverteilungen,  VDI Berichte 2323, S. 61-78
DOI: 10.15488/3975
ISBN: 978-3-18-092323-9

Leuteritz, G.; Demminger, C.; Maier, H. J.; Lachmayer, R. (2018): Hybride Additive Fertigung: Ansätze zur Kombination von additiven und gießtechnischen Fertigungsverfahren für die Serienfertigung,  In Lachmayer, R.; Lippert, R.B.; Kaierle, S. (Hrsg.): Additive Serienfertigung; S. 115-126. Springer Vieweg, Berlin, Heidelberg.
DOI: 10.1007/978-3-662-56463-9
ISBN: 978-3-662-56463-9

Leuteritz, G.; Lachmayer, R. (2018): Additive manufacturing of reflective optics: evaluating finishing methods,  Proceedings of SPIE 10523
DOI: 10.1117/12.2289998

Leuteritz, G.; Lippert. R. B.; Rettschlag, K.; Lachmayer, R. (2018): Comparison of Additive Manufacturing techniques regarding mechanical and optical properties,  DGaO Proceedings 2018, ISSN: 1614-8436, https://www.dgao-proceedings.de/download/119/119_a1.pdf

Leuteritz, G.; Rohling, M.; Lachmayer, R. (2018): Functional integration for additively manufactured reflectors,  DGaO Proceedings 2018, ISSN: 1614-8436, https://www.dgao-proceedings.de/download/119/119_p54.pdf

Ley, P.-P.; Held, M. P.; Lachmayer, R. (2018): Analysis of LED arrangement in an array with respect to lens geometry,  Proceedings of SPIE 10554
DOI: 10.1117/12.2290253

Ley, P.-P.; Held, M. P.; Wolf, A.; Lachmayer, R. (2018): Konzepte zur Beleuchtung von Lichtmodulatoren,  DGaO Proceedings 2018, ISSN: 1614-8436 https://www.dgao-proceedings.de/download/119/119_p47.pdf
DOI: 10.15488/4085

Li, H.; Gembarski, P. C.; Lachmayer, R. (2018): Template-Based Design for Design Co-Creation,  Proceedings of the 5th International Conference on Design Creativity (ICDC2018), Bath, UK, 31.01.-02.02.2018

Li, H.; Lachmayer, R. (2018): Generative Design Approach for Modeling Creative Designs,  IOP Conference Series: Materials Science and Engineering, 408, 012035
DOI: 10.1088/1757-899X/408/1/012035

Mozgova, I., Yanchevskyi,I., Lachmayer, R. (2018): Prediction of the Residual Life of a Component under Intensive Random Dynamic Loading within the Scope of Technical Inheritance,  15th International Design Conference, 21-24 May 2018, Dubrovnik, Croatia, S. 1643-1650
DOI: https://doi.org/10.21278/idc.2018.0511

Rizvi, S.; Ley, P.-P.; Knöchelmann, M.; Lachmayer, R. (2018): Road safety enhancement: An investigation on the visibility of on-road image projections using DMD-based pixel light systems,  Proceedings of SPIE 10554
DOI: 10.1117/12.2290456

Scheidel, W.; Mozgova, I.; Lachmayer, R. (2018): Teaching Industry 4.0 - Product Data Management for Small and Medium-Sized Enterprises,  Proceedings of the 20th Internation Conference on Engineering and Product Design Education, S. 151-156
ISBN: 978-1-912254-02-6

Scheidel, W.; Mozgova, I.; Lachmayer, R. (2018): A case study for a unified designation of development information in a PDM System for Industry 4.0 products,  Procedia Manufacturing 24, 2–7
DOI: 10.1016/j.promfg.2018.06.002

Schöneich, M.; Neumann, C.; Lachmayer, R. (2018): Auswirkungen von Mesostrukturen in Fahrzeuginnenraum auf die Reflexionseigenschaften,  VDI Berichte 2323, S. 219-231
ISBN: 978-3-18-092323-9

Schreiber, D.; Gembarski, P. C.; Lachmayer, R. (2018): Developing a Constraint-Based Solution Space for Product-Service Systems,  Proceedings of the 8th International Conference on Mass Customization and Personalization – Community of Europe (MCP - CE 2018), Novi Sad, Serbien, 19.09.-21.09.2018

Siqueira, R.; Bibani, M.; Mozgova, I.; Lachmayer, R. (2018): Case-Based Parametric Analysis: A Method for Design of Tailored Forming Hybrid Material Component,  ISAT 2018 Proceedings, Springer Verlag, S. 14-28
DOI: 10.1007/978-3-319-99996-8_2

Wolniak, P., Mozgova, I., Lachmayer, R. (2018): Concept for the Implementation of a Scaling Strategy into the Paradigm of Technical Inheritance,  4th International Conference on System-Integrated Intelligence, 19-20 June 2018, Hannover, Germany, Procedia Manufacturing, Vol. 24, S. 80–85
DOI: 10.1016/j.promfg.2018.06.012

Wolniak, P., Sauthoff, B., Lachmayer, R. (2018): Scaling of Structural Components by Knowledge-Based Engineering Methods,  15th International Design Conference, 21-24 May 2018, Dubrovnik, Croatia, S. 1757-1768
DOI: 10.21278/idc.2018.0234

Albers, A.; Bursac, N.; Marthaler, F.; Siebe, A.; Reiß, N.; Bender, B.; Binz, H.; Krause, D.; Lachmayer, R.; Matthiesen, S.; Vietor, T. (2017): Szenarien der Methodenanwendung - Ein White-Paper für die Methodenforschung,  Konstruktion online 2017, Ausgabe 11-12

Bibani, M.; Gembarski, P. C.; Lachmayer, R. (2017): Ein wissensbasiertes System zur Konstruktion von Staubabscheidern,  DfX-Symposium 04-05.10, Bamberg
ISBN: 978-3-946094-20-3

Brockmöller, T.; Gembarski, P. C.; Mozgova, I.; Lachmayer, R. (2017): Design Catalogue in a CAE Environment for the Illustration of Tailored Forming,  59th Ilmenau Scientific Colloquium, 11-15 September, Ilmenau

Brockmöller, T.; Mozgova, I.; Lachmayer, R. (2017): An Approach to Analyse the Potential of Tailored Forming by TRIZ Reverse,  Proccedings of the 21st International Conference on Engineering Design (ICED 17) Vol 4: Design Methods and Tools, pp. 445-452, Vancouver, Canada, 21-25 August
ISBN: 978-1-904670-92-6

Chatzizyrli, E.; Tinne, N.; Lachmayer, R.; Neumann, J.; Kracht, D. (2017): Modeling of photoluminescence in laser-based lighting systems,  SPIE Proceedings - volume on Photonics, Devices and Systems VII 2017

Gembarski, P. C.; Lachmayer, R. (2017): Teaching solution space development: Experiences from the Hanover Knowledge-Based-Design-Lab,  Proceedings of the 9th World Conference on Mass Customization, Personalization and Co-Creation (MCPC 2017), Aachen, Germany, 20.-21.11.2017

Gembarski, P. C.; Lachmayer, R. (2017): Ein Beitrag zur Modellierung konstruktiver Lösungsräume,  Tagungsband des Stuttgarter Symposiums für Produktentwicklung 2017 (SSP2017), 29.06.2017, Stuttgart

Gembarski, P. C.; Schoormann, T.; Schreiber, D.; Knackstedt, R.; Lachmayer, R. (2017): Effects of Mass Customization on Sustainability - A Literature-based Analysis,  Proceedings of the 9th World Conference on Mass Customization, Personalization and Co-Creation (MCPC 2017), Aachen, Germany, 20.-21.11.2017

Gembarski, P. C.; Wellmann, T.; Fleige, H.-U.; Lachmayer, R. (2017): Entwicklungsprozess zur wissensbasierten Prüfstandskonstruktion,  Tagungsband des Stuttgarter Symposiums für Produktentwicklung 2017 (SSP2017), 29.06.2017, Stuttgart

Held, M. P.; Lachmayer, R. (2017): Efficient conceptual design of an LED-based pixel light vehicle headlamps,  Proc. SPIE 10603
DOI: 10.1117/12.2292741

Johannknecht, F.; Gatzen, M. M.; Lachmayer, R. (2017): Systematic Approach to Optimize Cost Drivers Based on Life Cycle Cost Modeling,  Proceedings of the 21st International Conference on Engineering Design (ICED17), Vol. 5: Design for X, Design to X, Vancouver, Canada, 21.-25.08.2017
ISBN: 978-1-904670-93-3

Khan, M. S.; Rahlves, M.; Roth, B.; Lachmayer, R. (2017): Diffractive Optical Elements: A Novel Concept for Automotive Lighting,  DGaO-Proceedings 2017
ISBN: ISSN: 1614-8436; http://www.dgao-proceedings.de/download/118/118_p17.pdf

Kusch, A.; Wurz, M.; Held, M. P.; Wolf, A.; Lachmayer, R. (2017): LED packaging with optimized heat dissipation for a micro LED array,  In T. Otto (Hrsg.): Smart Systems Integration, S. 399-402
ISBN: 978-3-95735-057-2

Lachmayer, R.; Mozgova, I.; Sauthoff, B.; Gottwald, P.; Scheidel, W. (2017): Algorithmic design evolution based on product lifecycle information,  In: Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle: Genetics and Intelligence – Keys to Industry 4.0, B. Denkena, T. Mörke (Hrsg.), Academic Press, pp. 415-437
ISBN: eBook: 9780128126004, Paperback: 9780128119396.

Leuteritz, G.; Lippert, R. B.; Lachmayer, R. (2017): Optimizing Selective Laser Melting for Reflective Optics,  DGaO-Proceedings 2017
ISBN: ISSN: 1614-8436; http://www.dgao-proceedings.de/download/118/118_b6.pdf

Ley, P. P.; Held, M. P.; Wolf, A.; Lachmayer, R. (2017): Konzepte für hochauflösende Fahrzeugscheinwerfer unter Berücksichtigung der Étendue,  DGaO-Proceedings 2017
DOI: 10.15488/4086
ISBN: ISSN: 1614-8436; http://www.dgao-proceedings.de/download/118/118_p19.pdf

Lippert, R. B.; Lachmayer, R. (2017): Einflussfaktoren innerer Strukturen im Gestaltungsprozess von Strukturbauteilen für das selektive Laserstrahlschmelzen,  Proceedings of the 14th Rapid.Tech International Trade Show & Conference for Additive Manufacturing (Rapid.Tech), Erfurt, Germany, 20. - 22. Juni 2017
ISBN: 978-3-446-45459-0

Lippert, R. B.; Lachmayer, R. (2017): A design method for restriction oriented lightweight design by using selective laser melting,  Proceedings of the 21st International Conference on Engineering Design (ICED17), Vol. 5: Design for X, Design to X, Vancouver, Canada, 21.-25.08.2017, ISSN 2220-4342, https://www.designsociety.org/download-publication/39722/A+design+method+for+restriction+oriented+lightweight+design+by+using+selective+laser+melting
ISBN: 978-1-904670-93-3

Lippert, R. B.; Lachmayer, R. (2017): A Design Method for SLM-Parts Using Internal Structures in an Extended Design Space,  M. Meboldt and C. Klahn (eds.), Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications - AMPA2017, Zürich, Schweiz, 12.-15.09.2017
ISBN: 978-3-319-66865-9

Lippert, R. B.; Leuteritz, G.; Lachmayer, R. (2017): An approach to implement design for additive manufacturing in engineering studies,  Proceedings of the 21st International Conference on Engineering Design (ICED17), Vol. 5: Design for X, Design to X, Vancouver, Canada, 21.-25.08.2017, ISSN 2220-4342, https://www.designsociety.org/download-publication/39727/An+approach+to+implement+design+for+additive+manufacturing+in+engineering+studies
ISBN: 978-1-904670-93-3

Mozgova, I.; Barton, S.; Demminger, C.; Miebach, T.; Taptimthong, P.; Lachmayer, R.; Nyhuis, P.; Reimche, W.; Wurz, M. C. (2017): Technical Inheritance: Information basis for the identification and development of product generations,  Proceedings of the 21st International Conference on Engineering Design (ICED 17) Vol 6: Design Information and Knowledge, Vancouver, Canada, 21-25.08.2017, pp. 091-100
ISBN: ISBN: 978-1-904670-94-0, ISSN: 2220-4342

Pfullmann, N.; Thiel, A.; Thamm, M.; Plöger, R.; Kloppenburg, G.; Wolf, A.; Lachmayer, R. (2017): From mechanical ADB systems to high resolution headlamps – new opportunities of novel headlight systems,  Proceedings of the 12th International Symposium on Automotive Lighting (ISAL), S. 357-365
ISBN: 978-3-8316-4672-2

Rizvi, S.; Knöchelmann, M.; Ley, P. P.; Lachmayer, R. (2017): Survey of on-road image projection with pixel light systems,  Proc. SPIE 10603, Photonics, Devices, and Systems VII, 1060314
DOI: 10.1117/12.2292740

Scheidel, W.; Mozgova, I.; Lachmayer, R. (2017): Product Data Management in the Context of Industry 4.0,  59th Ilmenau Scientific Colloquium, 11-15 September, Ilmenau

Scheidel, W.; Mozgova, I.; Lachmayer, R. (2017): Structuring Information in Technical Inheritance by PDM Systems,  In Proceeding of ICED17-21st International Conference on Engineering Design, Vancouver, Canada, 21-25 August 2017

Schreiber, D.; Gembarski, P. C.; Lachmayer, R. (2017): Datamodels for PSS Development and Configuration: Existing Approaches and Future Research,  Proceedings of the 9th World Conference on Mass Customization, Personalization and Co-Creation (MCPC 2017), Aachen, Germany, 20.-21.11.2017

Schreiber, D.; Gembarski, P. C.; Lachmayer, R. (2017): Modeling and configuration for Product-Service Systems: State of the art and future research,  Proceedings of the 19th International Configuration Workshop (CWS 2017), Paris, September 14 - 15, 2017
ISBN: 978-2-9516606-2-5

Siqueira, R.; Mozgova, I.; Lachmayer, R. (2017): Development of a topology optimization method for tailored forming multi-material design ,  24th ABCM International Congress of Mechanical Engineering December 3-8, 2017, Curitiba, PR, Brazil
DOI: 10.26678/ABCM.COBEM2017.COB17-0079

Gembarski, P. C.; Bibani, M.; Lachmayer, R. (2016): Design Catalogues: Knowledge Repositories for Knowledge-Based-Engineering Applications,  In: Marjanović, D.; Štorga, M.; Pavković, N.; Bojčetić, N.; Škec, S.: Proceedings of the DESIGN 2016 14th International Design Conference

Gembarski, P. C.; Lachmayer, R. (2016): Mass Customization und Product-Service-Systems: Vergleich der Unternehmenstypen und der Entwicklungsumgebungen,  In: Tagungsband der Dienstleistungsmodellierung 2016 (DLM 2016), Karlsruhe, 2016. (ausgezeichnet mit dem Best Paper Award)

Gembarski, P. C.; Lachmayer, R. (2016): Impact of Rule-Based Systems on Product Complexity,  In: Anisic, Z.; Forza, C.: Proceedings of the 7th International Conference on Mass Customization and Personalisation in Central Europe (MCP-CE 2016), 21.-23.09.2016, Novi Sad, Serbien

Gembarski, P. C.; Lachmayer, R. (2016): Business Models for Customer Co-Design,  In: Anisic, Z.; Forza, C.: Proceedings of the 7th International Conference on Mass Customization and Personalisation in Central Europe (MCP-CE 2016), 21.-23.09.2016, Novi Sad, Serbien

Gembarski, P. C.; Sauthoff, B.; Brockmöller, T.; Lachmayer, R. (2016): Operationalization of Manufacturing Restrictions for CAD and KBE-Systems,  In: Marjanović, D.; Štorga, M.; Pavković, N.; Bojčetić, N.; Škec, S.: Proceedings of the DESIGN 2016 14th International Design Conference

Johannknecht, F.; Gatzen, M. M.; Hahn, D.; Lachmayer, R. (2016): Holistic Life Cycle Costing Approach for Different Development Phases of Drilling Tools,  OnePetro, International Petroleum Technology Conference, Bangkok
ISBN: 978-1-61399451-1

Johannknecht, F.; Lippert, R. B. (2016): Nachhaltigkeit und Business Case,  In: Lachmayer, R. et. al (Hrsg.): 3D-Druck beleuchtet – Additive Manufacturing auf dem Weg in die Anwendung, Springer Verlag, S. 31-44
ISBN: 978-3-662-49055-6

Kloppenburg, G.; Roth, J.; Wolf, A.; Lachmayer, R. (2016): Optische Eigenschaften eines RGB-Laserprojektionsmoduls für den Verkehrsraum,  VDI-Berichte 2278, 7. VDI-Tagung: Optische Technologien in der Fahrzeugtechnik 2016, VDI-Verlag, Düsseldorf, 2016, pp. 255–267
DOI: 10.15488/4005
ISBN: 978-3-18-092278-2

Lachmayer, R.; Lippert, R. B. (2016): Chancen und Herausforderungen für die Produktentwicklung,  Lachmayer, R.; Lippert, R. B.; Fahlbusch, T. (Hrsg.): 3D-Druck beleuchtet - Additive Manufacturing auf dem Weg in die Anwendung, S. 5 - 18, Springer Vieweg Verlag, Berlin Heidelberg, Mai 2016
ISBN: 978-3-662-49055-6

Lachmayer, R.; Zghair, Y. A.; Klose, C.; Nürnberger, F. (2016): Introducing Selective Laser Melting to Manufacture Machine Elements,  Proceedings of the DESIGN 2016 14th International Design Conference, S.831 - 842, Dubrovnik, Croatia, 16.-19.05.2016

Lippert, R. B.; Lachmayer, R. (2016): Restriktionsgerechte Bauteilgestaltung für das Selektive Laserstrahlschmelzen,  Proceedings of the 13th Rapid.Tech International Trade Show & Conference for Additive Manufacturing (Rapid.Tech), Erfurt, Germany, 14. - 16. Juni 2016
ISBN: 978-3-446-45017-2

Lippert, R. B.; Lachmayer, R. (2016): Bionic inspired Infill Structurs for a Light-Weight Design by using SLM,  Proceedings of the 14th International Design Conference (DESIGN), S.331 - 340, Dubrovnik, Croatia, 16. - 19. Mai 2016, ISSN 1847-9073, https://www.designsociety.org/download-publication/38843/BIONIC+INSPIRED+INFILL+STRUCTURES+FOR+A+LIGHT-WEIGHT+DESIGN+BY+USING+SLM

Lippert, R. B.; Lachmayer, R. (2016): Topology Examination for Additive Manufactured Aluminum Components,  Proceedings of the 3rd Fraunhofer Direct Digital Manufacturing Conference (DDMC16), Berlin, Germany, 16. - 17. März 2016
ISBN: 978-3-8396-1001-5

Sauthoff, B.; Gembarski, P. C.; Lachmayer, R. (2016): Maturity-Model-Based Design of Structural Components,  In: Marjanović, D.; Štorga, M.; Pavković, N.; Bojčetić, N.; Škec, S.: Proceedings of the DESIGN 2016 14th International Design Conference

Wolf, A.; Kloppenburg, G.; Danov, R.; Lachmayer, R. (2016): DMD Based Automotive Lighting Unit,  DGaO-Proceedings 2016, ISSN: 1614-8436, http://dgao-proceedings.de/download/117/117_c8.pdf
DOI: 10.15488/4004

Wolf, A.; Lachmayer, R. (2016): Hybrid simulation of thermo-optical effects in laser-based white light sources,  DGaO-Proceedings 2016, ISSN: 1614-8436, http://dgao-proceedings.de/download/117/117_p59.pdf
DOI: 10.15488/4057

Behrens, B.-A.; Lachmayer, R.; Malik, I.; Bonhage, M.; Sauthoff, B.; Gottwald, P. (2015): Sensorik in Schmiedewerkzeugen: Temperierung von Gesenken für die Warmmassivumformung steigert Präzision und reduziert Verschleiß,  wt Werkstattstechnik online, Jahrgang 105 (2015) H. 10, S. 692-696

Gembarski, P. C.; Lachmayer, R. (2015): Degrees of Customization and Sales Support Systems - Enablers to Sustainablility in Mass Customization,  Proceedings of the 20th International Conference on Engineering Design (ICED15), Milan, Italy, 27.-30.07.2015

Gembarski, P. C.; Lachmayer, R. (2015): A Business typological Framework for the Management of Product Complexity,  Managing Complexity - Proceedings of the 8th World Conference on Mass Customization, Personalization and Co-Creation (MCPC 2015), Montreal, Canada, 20.-22.10.2015

Gembarski, P. C.; Li, H.; Lachmayer, R. (2015): KBE-Modeling Techniques in Standard CAD-Systems: Case Study – Autodesk Inventor Professional,  Managing Complexity - Proceedings of the 8th World Conference on Mass Customization, Personalization and Co-Creation (MCPC 2015), Montreal, Canada, 20.-22.10.2015

Gembarski, P. C.; Steber, G.; Lachmayer, R. (2015): Reifegradmodellbasierte Entwicklung von Strukturbauteilen,  Design for X - Beiträge zum 26. Dfx-Symposium Oktober 2015, München, 07.-08.10.2014

Lachmayer, R.; Gembarski, P. C.; Gottwald, P.; Lippert, R. B. (2015): The Potential of Product Customization using Technologies of Additive Manufacturing,  Proceedings of the 8th World Conference on Mass Customization, Personalization and Co-Creation (MCPC), Montreal, Canada, 20. - 22. Oktober 2015
ISBN: 978-3-319-29056-0

Lachmayer, R.; Gottwald, P. (2015): Integrated Development by the Consideration of Product Experiences, 10th International Workshop on Integrated Design Engineering, 10-12.09.2014, Magdeburg/Gommern
ISBN: 9783941016095

Lachmayer, R.; Gottwald, R.; Lippert R. B. (2015): Approach for a comparatively evaluation of the sustainability for additive manufactured aluminum components,  Proceedings of the 20th International Conference on Engineering Design (ICED), Vol 4: Design for X, S. 215-224, ISSN 2220-4334, https://www.designsociety.org/download-publication/37774/APPROACH+FOR+A+COMPARATIVELY+EVALUATION+OF+THE+SUSTAINABILITY+FOR+ADDITIVE+ MANUFACTURED+ALUMINUM+COMPONENTS
ISBN: 978-1-904670-67-4

Lachmayer, R.; Kloppenburg, G.; Stephan, S. (2015): Temperature issues with white laser diodes, calculation and approach for new packages,  Proc. SPIE 9450, Photonics, Devices, and Systems VI, 94501P
DOI: 10.1117/12.2070411

Lachmayer, R.; Kloppenburg, G.; Wolf, A. (2015): Rapid prototyping of reflectors for vehicle lighting using laser activated remote phosphor,  Proc. SPIE 9383, 938305
DOI: 10.1117/12.2078791

Lachmayer, R.; Mozgova, I.; Gottwald, P. (2015): Formulation of Paradigm of Technical Inheritance,  Proceedings of the 20th International Conference on Engineering Design (ICED15), Milan, Italy, 27.-30.07.2015

Lachmayer, R.; Sauthoff, B.; Gottwald, P. (2015): Technische Vererbung in der Produktentwicklung,  VDI Konstruktion, Springer-Verlag, Ausgabe 7/8-2015, S.69

Lachmayer, R.; Sauthoff, B.; Gottwald, P. (2015): Technische Vererbung in der Produktentwicklung - Mit Industrie 4.0 einen Vorsprung bei der Entwicklung neuer Produktgenerationen erzielen ,  Newsletter Wissenschaftliche Gesellschaft für Produktentwicklung WiGeP, Ausgabe 1, April 2015, S. 6
ISBN: ISSN 16135504

Roth, J.; Wallaschek, J.; Kloppenburg, G.; Lachmayer, R.; Meyer, B.; Thomschke, S. (2015): RGB-Laser Scanning Module for Onroad Projection,  Proceedings of the 11th International Symposium on Automotive Lighting (ISAL), 385-394
ISBN: 978-3-8316-4481-0

Gembarski, P. C.; Lachmayer, R. (2014): A Method for Specification of Multi-variant Products Using Degrees of Freedom of Shape Attributes in Product Structures ,  Proceedings of the 7th World Conference on Mass Customization, Personalization, and Co-Creation (MCPC 2014), Aalborg, Denmark, February 4th-7th, 2014. Springer International Publishing, 2014. S. 27-37. (ausgezeichnet mit dem Best Paper Award)

Gembarski, P. C.; Lachmayer, R. (2014): Forward Variance Planning and Modeling of multi-variant Products,  Proceedings of the 24th CIRP Design Conference, Milan, Italy, April 14th-16th, 2014. Elsevier B.V., 2014.

Lachmayer, R.; Gottwald, P. (2014): An Approach to Integrate Data Mining into the Development Process,  The 3rd International Conference on Modelling and Management of Engineering Processes held in Magdeburg, Germany, November 20th-21th, 2013, Springer-Verlag, p 175-186 ISBN 978-3-662-44008-7

Lachmayer, R.; Jürgens, Ch. (2014): Blenden wir uns selbst? Ergebnisse einer Probandenstudie zur Untersuchung der Rückreflexion an Verkehrsschildern,  Nederlandse Stichting Voor Verlichtungskunde (Hg.) 2014 – Licht 2014, Tagungsband 21. Gemeinschaftstagung, Den Haag, S. 152-160

Lachmayer, R.; Jürgens, Ch. (2014): Eigenblendungen an retroreflektierenden Verkehrsschildern,  Optische Technologien in der Fahrzeugtechnik – VDI-Berichte 2221, VDI Verlag GmbH, Düsseldorf, S. 87-94, ISBN 978-3-18-092221-8

Lachmayer, R.; Lippert, R. B. (2014): Education in Cross Enterprise Engineering Design,  Proceedings of the 19th Academic Design Management Conference (dmi), London, England, 02. - 04. September 2014
ISBN: 978-0-615-99152-8

Lachmayer, R.; Wolf, A.; Kloppenburg, G. (2014): Reflektorbasierte Laser-Lichtmodule als Zusatzfernlicht für die Fahrzeugbeleuchtung,  Nederlandse Stichting Voor Verlichtungskunde (Hg.) 2014 – Licht 2014, Tagungsband 21. Gemeinschaftstagung, 21.-24.09.2014, Den Haag, S. 16-24
DOI: 10.15488/11561

Lachmayer, R.; Wolf, A.; Kloppenburg, G. (2014): Lichtmodule auf Basis von laseraktiviertem Leuchtstoff für den Einsatz als Zusatzfernlicht,  Optische Technologien in der Fahrzeugtechnik – VDI-Berichte 2221, VDI Verlag GmbH, Düsseldorf, S. 31-44, ISBN 978-3-18-092221-8
DOI: 10.15488/4007
ISBN: 978-3-18-092221-8

Sauthoff, B.; Gembarski, P. C.; Lachmayer, R. (2014): Der generative Gestaltansatz im Kontext von wissensbasierter Konstruktion,  Design for X - Beiträge zum 25. Dfx-Symposium Oktober 2014, Bamberg, 01.-02.10.2014

Basu, Ch.; Kloppenburg, G.; Wolf, A.; Wollweber, M.; Roth, B.; Lachmayer, R. (2013): A High Power Blue Diode Laser Pumped White Light Source Using Remote Phosphors,  Khanh (Hg.): Proceedings of the 10th International Symposium on Automotive Lighting, Herbert Utz Verlag GmbH, München, S. 126-136
ISBN: 978-3-8316-4291-5

Gembarski, P. C.; Lachmayer, R. (2013): Unternehmenstypologisches Komplexitätsmanagement,  Design for X - Beiträge zum 24. DfX-Symposium, September 2013, ISBN 978-3-941492-63-9

Lachmayer, R.; Danov, R.; Wolf, A.; Marutzky, M.; Kleinert, B. (2013): Vergleich photometrischer Messverfahren in der Kfz-Lichtmesstechnik,  DGaO-Proceedings 2013, ISSN: 1614-8436, http://www.dgao-proceedings.de/download/114/114_b16.pdf

Sauthoff, B.; Lachmayer, R. (2013): Optimierung von Bauteilen auf Basis von Produktnutzungsinformationen,  Design for X, Beiträge zum 24. DfX-Symposium September 2013,

Lachmayer, R.; Stephan, S. (2012): Model-based validation and development of LED-systems: MValEnt,  Proc. of SPIE Vol. 8550
DOI: 10.1117/12.981386

Gangwar, S.; Saxena, P.; Biermann, T.; Steinnagel, C.; Lachmayer, R. (2024): Influence of Build Height on Quality of Additively Manufactured Thermoplastic Polyurethane Parts,  Advanced Engineering Materials, Volume 26, Issue 12, June 2024, 2400293
DOI: 10.1002/adem.202400293

Gangwar, S.; Saxena, P.; Virmani, N.; Biermann, T.; Steinnagel C.; Lachmayer, R. (2024): Selection of a suitable additive manufacturing process for soft robotics application using three-way decision-making,  The International Journal of Advanced Manufacturing Technology, Volume 132, pages 2003–2015, (2024)
DOI: 10.1007/s00170-024-13398-x

Grabe, T.; Biermann, T.; Wolf, A.; Al-Nuwaider, J.; Krauss, H.; August, J.; Yu, W.; Heinz, J. B.; Bayerl, M.; Xu, K.; Wang, Q.; Wu, J.; Roth, B.; Ren, W.; Lachmayer, R. (2024): Application-inspired additive manufacturing of Raman optics,  Optics & Laser Technology, Volume 165, October 2023, 109574
DOI: 10.1016/j.optlastec.2023.109574

Hill, B.O.; Biermann, T.; Ripken, T.; Lachmayer, T.; Wollweber, M. (2024): Using water as immersion medium for scanning laser optical tomography to analyze functionalized silicone waveguides,  Proceedings Volume PC12848, Three-Dimensional and Multidimensional Microscopy: Image Acquisition and Processing XXXI; PC128480D (2024)
DOI: 10.1117/12.3003809

Hill, O.; Wollweber, M.; Biermann, T.; Ripken, T.; Lachmayer, R. (2024): Imperfect refractive index matching in scanning laser optical tomography and a method for digital correction,  Journal of Biomedical Optics (JBO) 2024 Jun
DOI: 10.1117/1.JBO.29.6.066004

Meyer zu Westerhausen, S.; Raveendran, G.; Lauth, T.-H.; Meyer, O.; Rosemann, D.; Wawer, M.L.; Stauß, T.; Wurst, J.; Lachmayer, R. (2024): Reliability Assessment of Wireless Sensor Networks by Strain-Based Region Analysis for Redundancy Estimation in Measurements on the Example of an Aircraft Wing Box,  Journal MDPI Sensors 2024, 24(13), 4107
DOI: 10.3390/s24134107

Müller, P.; Synek, A.; Stauß, T.; Steinnagel, C.; Ehlers, E.; Gembarski, P.C.; Pahr, D.; Lachmayer, R. (2024): Development of a density-based topology optimization of homogenized lattice structures for individualized hip endoprostheses and validation using micro-FE,  Scientific Report, 14, 5719
DOI: 10.1038/s41598-024-56327-4

Teves, S.; Biermann, T.; Ziebehl, A.; Eckert, J. G.; Hill, O.; Xia, P.; Wollweber, M.; Ripken, T.; Bigall, N. C.; Lachmayer, R. (2024): Active-mixing printhead for on-the-fly composition adjustment of multi component materials in Direct Ink Writing,  Additive Manufacturing Letters, Volume 10, July 2024, 100217
DOI: 10.1016/j.addlet.2024.100217

Bode, B.; Herrmann, K.; Reusch, J.; Plappert, S.; Ehlers, T.; Gembarski, P. C.; Hasse, C.; Lachmayer, R. (2023): Thermo-Elastic Topology Optimization For High Temperatures Gradients Using Load Separation,  Procedia CIRP (Vol. 119, pp. 576–581). Elsevier BV
DOI: https://doi.org/10.1016/j.procir.2023.03.113

Chatzizyrli, E.; Afentaki, A.; Hinkelmann, M.; Lachmayer, R.; Neumann, J.; Kracht, D. (2023): Optimizing LERP systems: opto-thermal steady-state simulation analysis and experimental validation,  Optics Express (13) 31, 22075-22091
DOI: 10.1364/OE.489384

Ehlers, T.; Oel, M.; Tatzko, S.; Kleyman, G.; Niedermeyer, J.; Wallaschek, J.; Lachmayer, R. (2023): Design Guidelines for Additive Manufactured Particle Dampers: A Review,  Procedia CIRP, Volume 119, 2023, Pages 891-896, Elsevier BV
DOI: 10.1016/j.procir.2023.03.134

Herrmann, K.; Plappert, S.; Gembarski, P. C.; Lachmayer, R. (2023): Process Chain-Oriented Design Evaluation of Multi-Material Components by Knowledge-Based Engineering,  Algorithms 16(5), 247
DOI: https://doi.org/10.3390/a16050247

Meyer, I.; Oel, M.; Ehlers, T.; Lachmayer, R. (2023): Additive manufacturing of multi-material parts – Design guidelines for manufacturing of 316L/CuCrZr in laser powder bed fusion,  Heliyon, 9(8), e18301
DOI: https://doi.org/10.1016/j.heliyon.2023.e18301

Niedermeyer, J.; Ehlers, T.; Lachmayer, R. (2023): Potential of additively manufactured particle damped compressor blades: A literature review,  Procedia CIRP (Vol. 119, pp. 570–575), Elsevier BV
DOI: https://doi.org/10.1016/j.procir.2023.02.151

Oel, M.; Rossmann, J.; Bode, B.; Meyer, I.; Ehlers, T.; Hackl, C. M.; Lachmayer, R. (2023): Multi-material laser powder bed fusion additive manufacturing of concentrated wound stator teeth,  Additive Manufacturing Letters, 7, 100165
DOI: https://doi.org/10.1016/j.addlet.2023.100165

Plappert, S.; Becker, C.; Gembarski, P.C.; Lachmayer, R. (2023): Scalable BDI-based Multi-Agent System for Digital Design Reviews,  Procedia Computer Science, Volume 225, 2023, Pages 3593-3602, 27th International Conference on Knowledge Based and Intelligent Information and Engineering Sytems (KES 2023), Elsevier
DOI: 10.1016/j.procs.2023.10.354

Steinnagel, C.; Bastimar, C.; Gembarski, P. C.; Plappert, S.; Müller, P.; Lachmayer, R. (2023): Application of the Computational Design Synthesis framework for individualized car seats,  Procedia CIRP (Vol. 119, pp. 1109–1114), Elsevier BV
DOI: https://doi.org/10.1016/j.procir.2023.02.184

Wu, J.; Grabe, T.; Götz, J.-L.; Trapp, J.; Serrano de Souza, A.; Biermann, T.; Wolf, A.; Ley, P.-P.; Duan, K.; Lachmayer R.; Ren, W. (2023): Linear scalability of dense-pattern Herriott-type multipass cell design,  Applied Physics B, Volume 129, article number 87, (2023)
DOI: 10.1007/s00340-023-08031-w

Wurst, J.; Ganter, N.; Ehlers, T.; Schneider, J. A.; Lachmayer, R. (2023): Assessment of the ecological impact of metal additive repair and refurbishment using powder bed fusion by laser beam based on a multiple case study,  Journal of Cleaner Production 423(3)
DOI: 10.1016/j.jclepro.2023.138630

Xia, P.; Grabe, T.; Biermann, T.; Ziebehl, A.; Teves, S.; Lachmayer, R. (2023): Tolerance analysis and design optimization of additively manufactured mechanical structure for a Raman spectrometer system,  SPIE Optical Metrology, 2023, Munich, Germany
DOI: 10.1117/12.2673436

Ziebehl, A.; Grabe, T.; Biermann, T.; Xia, P.; Teves, S.; Lachmayer, R. (2023): Parametric multiphysics study of focus-variable silicone lenses,  Applied Optics, 62, 30
DOI: 10.1364/AO.499811

Dai, Z.; Wolf, A.; Ley, P. P.; Glück, T.; Sundermeier, M. C.; Lachmayer, R. (2022): Requirements for automotive lidar systems,  Sensors, 22(19), 7532
DOI: https://doi.org/10.3390/s22197532

Ehlers, T.; Lachmayer, R. (2022): Design of Particle Dampers for Laser Powder Bed Fusion,  In: Applied Sciences, 12(4), 2237
DOI: 10.3390/app12042237

Lachmayer, R.; Behrens, B.-A.; Ehlers, T.; Müller, P.; Althaus, P.; Oel, M.; Farahmand, E.; Gembarski, P. C.; Wester, H.; Huebner, S. (2022): Process-Integrated Lubrication in Sheet Metal Forming,  Journal of Manufacturing and Materials Processing, 6(5), 121
DOI: 10.3390/jmmp6050121

Ley, P.-P.; Knöchelmann, M.; Wolf, A.; Lachmayer R. (2022): Tailoring the V-Model for Optics: A Methodology for Optomechatronic Systems,  In: Applied Sciences, 12(15), 7798
DOI: 10.3390/app12157798

Müller, P., Gembarski, P. C., & Lachmayer, R. (2022): Density-Based Topology Optimization for a Defined External State of Stress in Individualized Endoprosthesis,  Proceedings of the Design Society (Vol. 2, pp. 533–542). Cambridge University Press (CUP)
DOI: https://doi.org/10.1017/pds.2022.55

Plappert, S.; Becker, C.; Gembarski, P.C.; Lachmayer, R. (2022): Feasibility Evaluation of Milling Designs Using Multi-Agent Systems,  Proceedings of the Design Society, Vol. 2, 763-772
DOI: https://doi.org/10.1017/pds.2022.78

Plappert, S.; Gembarski, P. C.; Lachmayer, R. (2022): Development of a knowledge-based and collaborative engineering design agent,  Procedia Computer Science, (Vol. 207, pp. 946-955). Elsevier BV
DOI: https://doi.org/10.1016/j.procs.2022.09.150

Schwede, L.-N.; Greve, E.; Krause, D.; Otto, K.; Moon, S. K.; Albers, A.; Kirchern, E.; Lachmayer, R.; Bursac, N.; Inkermann, D.; Rapp, S.; Hausmann, M.; Schneider, J. (2022): How to Use the Levers of Modularity Properly – Linking Modularization to Economic Targets,  in: ASME, Journal of Mechanical Design
ISSN: 1050-0472

Ehlers, T.; Tatzko, S.; Wallaschek, J.; Lachmayer, R. (2021): Design of particle dampers for additive manufacturing, In: Additive Manufacturing, Vol. 38 , pp. 101752
DOI: 10.1016/j.addma.2020.101752

Gembarski, P. C.; Plappert, S.; Lachmayer, R. (2021): Making design decisions under uncertainties: probabilistic reasoning and robust product design,  Journal of Intelligent Information Systems, Vol. 52, 563–581
DOI: https://doi.org/10.1007/s10844-021-00665-6

Khan, M.S.; Farooq, H.; Wittmund, C.; Klimke, S.; Lachmayer, R.; Renz, F.; Roth, B. (2021): Polymer Optical Waveguide Sensor Based on Fe-Amino-Triazole Complex Molecular Switches,  MDPI
DOI: 10.3390/polym13020195

Kranert, F.; Budde, J.; Hinkelmann, M.; Neumann, J.; Kracht, D.; Lachmayer, R. (2021): 3D Fabrication and Characterization of Polymer-Imprinted Optics for Function-Integrated, Lightweight Optomechanical Systems; In: Journal of Laser Applications, Vol.33, Issue 4
DOI: 10.2351/7.0000492

Schneider, D.; Shrotri, A.; Flatt, H.; Stübbe, O.; Wolf, A.; Lachmayer, R.; Bunge, Ch.-A. (2021): Impact of industrial environments on visible light communication, In: Optics Express, S. 16087-16104
DOI: 10.1364/OE.421757

Altun, O.; Zhang, D.; Siqueira, R.; Wolniak, P.; Mozgova, I.; Lachmayer, R. (2020): Identification of dynamic loads on structural component with artificial neural networks,  Procedia Manufacturing, Volume 52, Pages 181-186, ISSN 2351-9789
DOI: 10.1016/j.promfg.2020.11.032

Hackl, J.; Krause, D.; Otto, K.; Windheim, M.; Moon, S. K.; Bursac, N.; Lachmayer, R. (2020): Impact of Modularity Decisions on a Firm's Economic Objectives,  ASME - Journal of Mechanical Design, 142 (4)
DOI: 10.1115/1.4044914

Khan, M. S.; Saeed, W. M.; Roth, B.; Lachmayer, R. (2020): Diffractive optics based automotive lighting system,  Advanced Optical Technologies
DOI: 10.1515/aot-2020-0055

Khan, M.; Lachmayer, R.; Roth, B. (2020): Maskless Lithography for Versatile and Low Cost Fabrication of Polymer based Micro- and Nano-Optical Structures,  OSA Continuum, 3 (10)
DOI: 10.1364/OSAC.400056

Li, Y.; Knöchelmann, M.; Lachmayer, R. (2020): Beam Pre-Shaping Methods Using Lenslet Arrays for Area-Based High-Resolution Vehicle Headlamp Systems,  Applied Sciences 2020, 10(13), 4569
DOI: /10.3390/app10134569

Behrens, B.-A.; Breidenstein, B.; Duran, D.; Herbst, S.; Lachmayer, R.; Löhnert, S.; Matthias, T.; Mozgova, I.; Nürnberger, F.; Prasanthan, V.; Siqueira, R.; Töller, F.; Wriggers, P. (2019): Simulation-Aided Process Chain Design for the Manufacturing of Hybrid Shafts,  HTM - Journal of Heat Treatment and Materials 74(2): 115–135
DOI: 10.3139/105.110378

Hagen, S.; Brinker, J.; Gembarski, P.C.; Lachmayer, R.; Thomas, O. (2019): Integration von Smarten Produkten und Dienstleistungen im IoT-Zeitalter: Ein Graph-basierter Entwicklungsansatz,  HMD Praxis der Wirtschaftsinformatik
DOI: 10.1365/s40702-019-00569-8

Kammler, F.; Gembarski, P.C.; Brinker, J.; Thomas, O.; Lachmayer, R. (2019): Kunden- und kontextabhängige Konfiguration Smarter Produkte: Digitales Potenzial jenseits physischer Grenzen?,  HMD Praxis der Wirtschaftsinformatik
DOI: 10.1365/s40702-019-00523-8

Knöchelmann, M., Held, M., Kloppenburg, G., Lachmayer, R. (2019): High-resolution headlamps – technology analysis and system design,  Advanced Optical Technologies, 8(1), pp. 33-46
DOI: 10.1515/aot-2018-0060

Lachmayer, R.; Rettschlag, K. (2019): Workshop Konstruktion für die Additive Fertigung 2019 in Hannover,  Newsletter Wissenschaftliche Gesellschaft für Produktionstechnik (WiGeP), Ausgabe 2, November 2019, S. 20-21, ISSN: 1613-5504

Siqueira, R.; Bibani, M.; Duran, D.; Mozgova, I.; Lachmayer, R.; Behrens, B.-A. (2019): An Adapted Case-based Resoaning for Design and Manufacturing of Tailored Forming Multi-material Components,  International Journal for Interactive Design and Manufacturing
DOI: 10.1007/s12008-019-00566-7

Gembarski, P.C.; Lachmayer, R. (2018): Solution Space Development: Conceptual Reflections and Development of the Parameter Space Matrix as Planning Tool for Geometry-based Solution Spaces,  International Journal of Industrial Engineering and Management (IJIEM)
DOI: 10.24867/IJIEM-2018-4-177

Gembarski, P.C.; Lachmayer, R. (2018): Product-Service-Systems - What and why Developers can learn from Mass Customization,  Enterprise Modelling and Information Systems Architectures, Vol. 13, No. 16, pp. 1-16
DOI: 10.18417/emisa.13.16

Khan, M. S.; Rahlves, M.; Lachmayer, R.; Roth, B. (2018): Polymer-based diffractive optical elements for rear end automotive applications: design and fabrication process,  Applied Optics, Vol. 57, Issue 30, S. 9106-9113
DOI: 10.1364/AO.57.009106

Lachmayer R., Yanchevskyi, I., Mozgova, I., Gottwald, P. (2018): Identification of several non-stationary loads applied to an elastically deformed structure,  Applied and Computational Mechanics, Vol. 12, Iss. 1., S. 17-32
DOI: 10.24132/acm.2018.365

Lippert, R. B.; Siqueira, R.; Lachmayer, R.; Baudach, T.; Knöß, M. (2018): Additive Fertigung als Bestandteil des industriellen Konstruktionsprozesses,  Konstruktion, Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe; Springer VDI-Verlag; Ausgabe 5/2018; S. 46 - 49; ISSN: 0720-5953

Mozgova, I.; Yanchevskyi, I.; Gerasymenko, M.; Lachmayer, R. (2018): Mobile automated diagnostics of stress state and residual life prediction for a component under intensive random dynamic loads,  Procedia Manufacturing, Vol. 24, S. 210–215
DOI: 10.1016/j.promfg.2018.06.037

Siqueira, R.; Mozgova, I.; Lachmayer, R. (2018): An Interfacial Zone Evolutionary Optimization Method with Manufacturing Constraints for Hybrid Components,  Journal of Computational Design and Engineering
DOI: 10.1016/j.jcde.2018.10.003

Gembarski, P. C.; Lachmayer, R. (2017): Designing Customer Co-Creation: Business Models and Co-Design Activities,  International Journal of Industrial Engineering and Management (IJIEM), 8.3, pp.121-130

Gembarski, P. C.; Lachmayer, R. (2017): How Rule-Based Systems impact Product Complexity,  ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering, 15.1, pp.17-24, ISSN: 1584-2665

Gembarski, P.C.; Li, H.; Lachmayer, R. (2017): Template-based modelling of structural components,  International Journal of Mechanical Engineering and Robotics Research, Vol. 6, No. 5, pp. 336-342
DOI: 10.18178/ijmerr.6.5.336-342

Demminger, C.; Mozgova, I.; Quirico, M.; Uhlich, F.; Denkena, B.; Lachmayer, R.; Nyhuis, P. (2016): The Concept of Technical Inheritance in Operation: Analysis of the Information Flow in the Life Cycle of Smart Products,  Procedia Technology, Volume 26, 2016, Pages 79-88
DOI: 10.1016/j.protcy.2016.08.012
ISBN: ISSN 2212-0173

Johannknecht, F.; Gatzen, M. M.; Lachmayer, R. (2016): Life Cycle Cost Model for Considering Fleet Utilization in Early Conceptual Design Phases,  Procedia CIRP, Vol. 48, S. 68-72, ISSN: 2212-8271

Kloppenburg, G.; Wolf, A.; Lachmayer, R. (2016): High-resolution vehicle headlamps: technologies and scanning prototype,  Advanced Optical Technologies 5(2): 147–155.
DOI: 10.1515/aot-2016-0001
ISBN: 2192-8576

Lachmayer, R.; Lippert, R. B. (2016): Der Megatrend 3D-Druck - Additive Manufacturing auf dem Weg in die Anwendung,  Newsletter Wissenschaftliche Gesellschaft für Produktentwicklung (WiGeP), Ausgabe 1, April 2016
ISBN: 1613-5504

Lachmayer, R.; Mozgova, I.; Scheidel, W. (2016): An Approach to Describe Gentelligent Components in their Life Cycle,  Procedia Technology, Volume 26, 2016, Pages 199-206
DOI: 10.1016/j.protcy.2016.08.027
ISBN: ISSN 2212-0173

Lachmayer, R.; Wolf, A.; Kloppenburg, G. (2015): Additive manufacturing of optical components,  SPIE Newsroom
DOI: 10.1117/2.1201511.006233

Lachmayer, R.; Mozgova, I.; Reimche, W.; Colditz, F.; Mroz, G.; Gottwald, P. (2014): Technical Inheritance: A Concept to Adapt the Evolution of Nature to Product Engineering ,  Procedia Technology 15 (2014) pp. 178–187
DOI: 10.1016/j.protcy.2014.09.070

Lachmayer, R.; Mozgova, I.; Sauthoff, B.; Gottwald, P. (2014): Evolutionary Approach for an Optimized Analysis of Product Life Cycle Data ,  Procedia Technology 15 ( 2014 ) pp. 359–368
DOI: 10.1016/j.protcy.2014.09.090

Lachmayer, R.; Wolf, A.; Kloppenburg, G. (2014): System efficiency of laser-based white light,  Advanced Optical Technologies 3 (5-6): 523–530, ISSN (Online) 2192-8584, ISSN (Print) 2192-8576
DOI: 10.1515/aot-2014-0048
ISBN: 2192-8576

Gooran Orimi, A.; Hamlaoui, R.; Backe, C.; Görner, H.; Glück, T.; Sundermeier, M. C.; Dai, Z.; Briken, V.; Lachmayer, R. (2024): A Digital Twin Framework for Field Data and Distributed Systems,  NFDI4Ing Conference 2023
DOI: 10.5281/ZENODO.8403959

Kahlfeld, R.; Meyer, I.; Meßmann, C.; Lachmayer, J.; Thies, N.; Ehlers, T.; Lachmayer, R.; Kabelac, S. (2023): Strukturen in additiv gefertigten Wärmeübertragern — Parameterbasierte Generierung und messtechnische Charakterisierung innerer Gitterstrukturen zur Verbesserung des Wärmeübergangs,  Deutsche Kälte-und Klimatagung 2023, 2023, 13. S.
DOI: 10.15488/16806

Raveendran, G.; Homeyer, K.; Raabe, J.; Bartels, T.; Lachmayer, R. (2023): Optimierung des Lichtmanagements in der Haltung von Mastputen,  25. Europäischer Lichttechnischer Kongress; Tagungsband, S.92-103; https://licht2023.at/wp-content/uploads/2023/04/Licht2023Langv2.pdf

Held, M. P.; Lachmayer, R. (2018): Micro Pixel LEDs – Design Challenge and Implementation for High-Resolution Headlamps,  Electronica LED Trend Forum, 12-16.11.2018

Siqueira, R.; Bibani, M.; Lachmayer, R.; Mozgova, I. (2018): A Case-based Reasoning Approach for Design of Tailored Forming Hybrid Material Component,  41st Solid Mechanics Conference, 27-31 August, Warsaw, Poland

Siqueira, R.; Lachmayer, R.; Mozgova, I. (2018): A Multi-material Optimization Method with Manufacturing Constraints for Tailored Forming,  41st Solid Mechanics Conference, 27-31 August, Warsaw, Poland

Kloppenburg, G.; Lachmayer, R. (2016): Laser scanning unit for vehicle lighting,  Intelligent Automotive Lighting 2016, Düsseldorf, January 26th-28th 2016

Lachmayer, R. (2016): Marktentwicklung und Anwendungen der Additiven Fertigung,  Laser Zentrum Hannover e.V. (LZH), Hannover, Germany, 09. November 2016

Lippert, R. B.; Lachmayer, R. (2016): Design and Benefits of Additive Manufacturing Components,  Hannover Messe, Werkstoff- & Leichtbau-Forum im Rahmen der Leitmesse Industrial Supply, Hannover, Germany, 25. - 29. April 2016

Lachmayer, R.; Ehlers, T.; Lippert, R.B. (2024): Design for Additive Manufacturing,  Springer Berlin, Heidelberg
DOI: 10.1007/978-3-662-68463-4
ISBN: 978-3-662-68462-7

Lachmayer, R.; Bode, B.; Kaierle, S. (2023): Innovative Product Development by Additive Manufacturing 2022,  Springer Cham
DOI: 10.1007/978-3-031-27261-5
ISBN: 978-3-031-27260-8

Lachmayer, R.; Ehlers, T.; Lippert, R.B. (2022): Entwicklungsmethodik für die Additive Fertigung, 2te Auflage,  Entwicklungsmethodik für die Additive Fertigung, Springer Vieweg Berlin, Heidelberg
DOI: 10.1007/978-3-662-65924-3
ISBN: 978-3-662-65923-6

Müller, P., Gembarski, P. C., & Lachmayer, R. (2022): Design Automation of a Patient-Specific Endoprosthesis with Multi- Objective Optimized Lattice Structures,  Innovative Product Development by Additive Manufacturing 2021 (pp. 113–128). Springer International Publishing
DOI: https://doi.org/10.1007/978-3-031-05918-6_8

Müller, P., Gembarski, P. C., & Lachmayer, R. (2021): Parametric Topology Synthesis of a Short-Shaft Hip Endoprosthesis Based on Patient-Specific Osteology,  Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems (pp. 669–676). Springer International Publishing.
DOI: https://doi.org/10.1007/978-3-030-90700-6_76

Lachmayer, R.; Lippert, R.B. (2020): Entwicklungsmethodik für die Additive Fertigung,  Springer Vieweg Berlin, Heidelberg
DOI: 10.1007/978-3-662-59789-7
ISBN: 978-3-662-59788-0

Lachmayer, R.; Rettschlag, K.; Kaierle S. (2020): Konstruktion für die Additive Fertigung 2019
DOI: 10.1007/978-3-662-6149-4
ISBN: 978-3-662-61148-7

Lachmayer, R.; Lippert, R. B.; Kaierle, S. (Hrsg.) (2018): Additive Serienfertigung - Erfolgsfaktoren und Handlungsfelder für die Anwendung,  Springer Vieweg Verlag, Berlin Heidelberg
ISBN: 978-3-662-56462-2

Lachmayer, R.; Lippert, R. B. (Hrsg.) (2017): Additive Manufacturing Quantifiziert - Visionäre Anwendungen und Stand der Technik,  Springer Vieweg Verlag, Berlin Heidelberg, Mai 2017
ISBN: 978-3-662-54112-8

Lachmayer, R.; Lippert, R. B.; Fahlbusch, T. (Hrsg.) (2016): 3D-Druck beleuchtet - Additive Manufacturing auf dem Weg in die Anwendung,  Springer Vieweg Verlag, Berlin Heidelberg, Mai 2016
ISBN: 978-3-662-49055-6

Meyer, I.; Messmann, C. O.; Oel, M.; Ehlers, T.; Lachmayer, R. (2023): Multi-Material PBF-LB/M Process,  TIB AV-Portal, LUH
DOI: 10.5446/62076

Oel, M.; Rossmann, J.; Bode, B.; Meyer, I.; Ehlers, T.; Hackl, C. M.; Lachmayer, R. (2023): Dataset: µCT data of additively manufactured multimaterial concentrated wound stator teeth
DOI: 10.25835/epj4ecfj

Bode, B.; Müller, P.; Gembarski, P.C.; Lachmayer, R.; Kaierle, S.; Hermsdorf, J.; Ehlers, T. (2023): Additives Fertigungsverfahren zum Herstellen eines Werkstücks und 3D-Drucker, DE10 2021 123 264.3

Bode, B.; Hoppe, L.; Gembarski, P.C.; Lachmyer, R. (2021): Verbindung zweier Bauteile mittels Passungen, DE102020118279B3

Kloock-Schreiber, D.; Bode, B.; da Silva de Siqueira, R.; Plappert, S.; Gembarski, P.C.; Lachmayer, R. (2021): Vorrichtung zum vollautomatischen Zubereiten von Heißgetränken und Verfahren zum vollautomatischen Zubereiten von Heißgetränken, DE102020119007B3

Kloock-Schreiber, D.; Bode, B.; da Silva de Siqueira, R.; Plappert, S.; Gembarski, P.C.; Lachmayer, R. (2021): Abscheideeinrichtung, Vorrichtung mit einer solchen Abscheideeinrichtung und Verfahren zum Abscheiden von Feststoffen aus einer Flüssigkeit, DE102020119008B3

Wolf, A.; Lachmayer, R.; Kloppenburg, G. (2017): Lighing module, lighting device and computer program, WO 2017/148764 A1